Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for JinkoSolar JKM555M-72HL4-V
Summarization of Contents
1. General Information
1.1 Overview
General introduction to Jinko Solar PV modules and installation.
1.2 Warnings
Crucial safety warnings for handling and installing PV modules.
2. Installation
2.1 Installation Safety
Safety measures and precautions during installation.
2.2 Installation Condition
Environmental and site requirements for PV module installation.
2.2.1 Climate Condition
Specifies operating temperature and humidity requirements.
2.2.2 Site Selection
Guidelines for choosing an optimal and safe installation location.
2.2.3 Tilt Angle Selection
Guidance on selecting the optimal tilt angle for maximum power output.
2.3 Mechanical Installation Introduction
Overview of mechanical mounting methods for PV modules.
2.3.1 Mounting with Bolts
Detailed instructions for mounting modules using bolts.
2.3.1.1 Mounting with Bolts (four mounting holes)
Specifics on using four mounting holes for bolt installation.
2.3.1.2 Mounting with Bolts (NEXTracker four mounting holes)
Mounting instructions using bolts with NEXTracker.
2.3.2 Mounting with clamps
Instructions for mounting modules using clamps.
2.3.2.1 Clamp Mounting on Long Sides of the Frames
Detailed guide for clamp installation on long frame sides.
2.3.2.2 Clamp Mounting on Short Sides of the Frames
Detailed guide for clamp installation on short frame sides.
2.3.2.3 Clamp Mounting on Long & Short Sides
Instructions for clamp installation on both long and short sides.
4. Maintenance and Care
4.1 Visual Inspection
Steps for visually inspecting modules for defects and damage.
4.2 Cleaning
Procedures and recommendations for cleaning PV modules.
4.3 Inspection of Connector and Cable
Recommended maintenance for connectors and cables.
Need help?
Do you have a question about the JKM555M-72HL4-V and is the answer not in the manual?
Questions and answers