Operating Fireplace - Desa VTGF33PRB Owner's Operation And Installation Manual

INSTALLING BATTERY INTO REMOTE
1. Locate slot at bottom of remote control (see
Figure 35). Firmly insert tool such as a small
screwdriver, butter knife, or dime into the slot
and lift up to remove cover.
2. Insert supplied battery into remote control.
Positive and negative are marked inside re-
mote control casing. Note: Remote will not
function if battery is not installed correctly.
3. Slide tab on cover into remote housing and
snap cover back into place.
IMPORTANT: Use only A23 12 volt battery in
remote. DO NOT use AAA battery.
Slot
A23 12
Volt
Battery
Positive
Negative
Figure 35 - Installing Battery
113134-01B
Tab
Cover
Remote
Control
www.desatech.com 21