What To Do Before Calling For Service - Scotsman C2648R Installation And User Manual

Remote condenser modular cuber
Hide thumbs Also See for C2648R:
Table of Contents

Advertisement

C2648
Remote Condenser Models - User Manual

What to do before calling for service

Reasons the machine might shut itself off:
Lack of water.
Freeze cycle takes too long.
Harvest cycle takes too long.
High discharge temperature.
Controller self test failure.
Very high voltage
Check the following:
1. Has the water supply to the ice machine or
building been shut off? If yes, the ice machine will
automatically restart within 25 minutes after water
begins to flow to it.
2. Has power been shut off to the ice machine? If
yes, the ice machine will automatically restart
when power is restored.
3. Has someone shut the power off to the remote
condenser while the ice machine still had power? If
yes, the ice machine may need to be manually
reset.
4. Is a curtain open because some ice is stuck
under it? If so, remove the ice and the machine
should start in a few minutes.
Note: Curtains can be removed & replaced anytime
the machine is in a standby mode or when it is in a
freeze cycle. Removal of all curtains during harvest
terminates harvest at that point and, if left off, will
result in the machine shutting off.
To Manually Reset the machine.
Push and release the Off button.
Push and release the On button.
To Shut the Machine Off:
1. Push and hold the Off button for 3 seconds or
until the machine stops.
Reset or Switch Off
October 2010
Page 23

Advertisement

Table of Contents
loading

Table of Contents