Table of Contents
Advertisement
C2648
Remote Condenser Models - User Manual
Use and Operation
Once started, the ice machine will automatically
make ice until the bin or dispenser is full of ice.
When ice level drops, the ice machine will resume
making ice. There are four indicator lights at the
front of the machine that provide information on the
condition of the machine.
External Indicator Lights:
•
Power
•
Status
•
Water
•
Clean
Power
Steady Green
Normal
Self Test
Blinking Green
Failure
Blinking Red
-
Yellow
-
Blinking Yellow
-
Light off
No power
All Blinking
Unit remotely locked out – check with leasing company
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the
machine. The water may have been shut off or the
water filter cartridges need to be changed.
If the Clean light is on, the machine has
determined that it may need to be cleaned. Contact
an authorized Scotsman service agent and have
the machine cleaned, de-scaled and sanitized.
Indicator Lights & Their Meanings
Status
Normal – bin full or making ice
Switching on or off
Diagnostic shutdown or, if making
ice, temperature sensor failure
-
-
Switched off
Other Indicators
Removal of the front panel allows review of the
Code Display and Component Indicator Lights.
Note: A Component Indicator Light switches ON to
indicate that the component is operating.
Note: There are three Curtain Switch lights, SW1,
SW2 and the Period in the display code. A curtain
switch light is ON when a curtain is either open or
not present.
October 2010
Page 17
Water
De-Scale & Sanitize
-
-
-
-
Lack of
-
water
Time to de-scale and
-
sanitize
-
In Cleaning mode
Normal
Normal
Advertisement
Table of Contents
