Sangean WR-3 User Manual page 16

SD cards and USB memory devices
This device only support SD card up to 2G. If it is a SD card with
USB connecting to the device, then 2G limit is not existed.
1. SD card and USB slots are located behind the rectangular panel
below the ON/OFF/Volume knob. Push and release the right
hand top corner of the panel. (To close the panel, press in the
panel door until it clicks into place).
2. Plug a SD card or USB device into the correspondence slot.
3. Press the SD/USB button
is shown on the left top corner of the display.
4. Playing MP3/WMA files in SD card or USB device:
a. Press the PAUSE button
PAUSE button again to resume it.
b. To stop the playing, press the STOP button
number of the files and tracks will be shown.
c. To take out the SD card, push the SD card, and it will be
bounced back.
5. Track selecting:
a. While the SD or USB is playing, press SEEK/TRACK button
to change to the desired track, and the track number
will appear on the display.
b. Or, you can input numbers to the desired track.
6. Folder/album selecting:
While the SD or USB is playing, press the TUNE/MP3 button
to change to the desired folder, and the folder number
will appear on the display.
15
repeatedly until the "SD" or "USB"
to pause the playing; Press the
. The total