Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-K2811
Summarization of Contents
Regulatory Information
FCC Information and Compliance
Details on FCC compliance, testing, and measures to correct interference.
EU Conformity Statement
Statement on product compliance with harmonized European standards.
Industry Canada Compliance
Information regarding Industry Canada ICES-003 and RSS standards.
Safety Instructions and Precautions
Danger and Cautionary Guidelines
Follow safeguards to prevent serious injury or death, and precautions for potential injury or damage.
Main Board Description
Single-Door Access Controller Main Board
Diagram and description of the main board for single-door controllers.
Two-Door Access Controller Main Board
Diagram and description of the main board for two-door controllers.
Four-Door Access Controller Main Board
Diagram and description of the main board for four-door controllers.
Component Descriptions
Explanation of components shown on the four-door access controller main board.
Battery Charging Board
Diagram and description of the battery charging board, used for backup power.
Terminal Description
Single-Door Access Controller Terminals
Description of terminals on the single-door access controller main board.
Two-Door Access Controller Terminals
Description of terminals on the two-door access controller main board.
Four-Door Access Controller Terminals
Description of terminals on the four-door access controller main board.
Installation Guide
Wall Mounting Procedure
Steps and considerations for mounting the access controller on a wall.
Terminal Wiring
Main Board Wiring Diagram
Diagram illustrating the wiring connections for the main board.
Wiegand Card Reader Wiring
Wiring diagram for connecting a Wiegand card reader.
RS-485 Card Reader Wiring
Wiring diagram for connecting an RS-485 card reader.
Lock Wiring Diagrams
Wiring diagrams for cathode and anode locks.
Alarm Output and Exit Button Wiring
Wiring diagrams for alarm outputs and exit buttons.
Door Contact and Power Supply Wiring
Wiring diagrams for door contacts and power supply connections.
Device Settings and Initialization
Device Initialization Procedures
Instructions for initializing the device using jumper caps (Options 1 and 2).
Relay Output NO/NC Settings
Configuration of Normally Open (NO) and Normally Closed (NC) states for lock and alarm relays.
Device Activation
Activate Device using SADP Tool
Steps to activate the device and modify IP address using the SADP tool.
Activate Device via Client Software
Steps to activate the device using the client software.
Client Software Configuration
Configuration Flow Overview
Flow diagram illustrating the steps for configuring the client software.
Device Management and Addition
Managing devices, adding them via IP, domain name, or in batch.
Group Management
Organizing devices and resources into groups for management.
Person Management
Adding, importing, and exporting person information and organization.
Schedule and Template Configuration
Configuring holidays, week schedules, and templates for access authorization.
Access Group Assignment
Creating and assigning access groups to persons and doors.
Advanced Function Configuration
Customizing device behavior with advanced features like anti-passback and interlock.
Configure Remaining Unlocked/Locked Status
Setting door status to remain unlocked or locked based on schedule or holidays.
Configure Anti-Passback Rules
Setting rules to prevent unauthorized passage through access points.
Configure Multi-door Interlocking
Setting up interlocking combinations for multiple doors.
Configure First Person In Function
Enabling first person authorization for door access.
Configure Multi-Factor Authentication
Setting up authentication methods for multiple persons or card groups.
Configure Card Reader Authentication Mode
Setting supported authentication modes for card readers.
Configure Device Parameters
Configuring general device, door, card reader, and alarm output parameters.
Door Control and Status Monitoring
Control Door Status
Manually controlling door states like open, close, remain open/closed.
Check Real-Time Access Records
Viewing and analyzing real-time access events and person details.
Need help?
Do you have a question about the DS-K2811 and is the answer not in the manual?
Questions and answers