Related Manuals for NORDIC FIRE HRV TORSBY
Summarization of Contents
INTRODUCTION
Important Safety Instructions
Crucial safety guidelines before installation and use.
THE MACHINE AND THE PELLETS
Components of the Appliance
Details and features of the pellet boiler stove's internal components.
Installation Site Requirements
Positioning
Optimal location considerations for appliance installation.
Spaces Around and Above the Appliance
Minimum clearance requirements for safe operation.
External Air Intake
Mandatory external air vent requirements for proper functioning.
Flue and Connection Specifications
Specifications for the flue system and its connection to the appliance.
Chimney Requirements
Specifications for the chimney system to ensure proper exhaust.
Electrical Connections
Control of Coupled Boiler
Electrical setup for integrating with a pre-existing boiler.
Three-Way Motorized Valve Control
Management of DHW system using a motorized valve.
Room Thermostat Connection
Connecting and operating the room thermostat for temperature control.
Appliance Display
Display Overview and Status Signals
Explanation of the appliance display and status indicators.
Button Functions and Menu Navigation
How to operate the appliance controls and navigate menus.
Appliance Menu System
Seasonal Setting
Configuration for summer or winter operating modes.
Clock Setting
Setting the appliance's internal clock.
Timer Setup
Programming daily, weekly, or weekend operating times.
Daily Program Settings
Configuration of daily on/off times for thermostat control.
Weekly Program Settings
Configuration of weekly on/off times for thermostat control.
Weekend Program Settings
Configuration of weekend on/off times for thermostat control.
Language Selection
Choosing the user interface language.
Acoustic Alarm Settings
Enabling or disabling audible alarm signals.
Initial Load Procedure
Procedure for pre-loading pellets for the first ignition.
Technical Calibration Access
Accessing advanced technical calibration settings.
System Type Configuration
Configuring the appliance based on the connected system.
User Calibration
Adjusting pellet loading and flue gas extraction speed.
Initial Appliance Start-Up
System Configuration and Plumbing Layouts
Setting up system type and understanding plumbing configurations.
Initial System Filling
Steps to fill the heating system with water and air.
Pellet Loading and Power Connection
Connecting power and loading pellets for operation.
Ignition Cycle
Detailed steps for starting the appliance's ignition process.
Switch-off Cycle
Procedure for safely shutting down the appliance.
Modifying Working Power
Adjusting the appliance's operating power level.
Changing Water Temperature
Setting boiler and DHW water temperatures.
Changing Air Fan Speed
Adjusting the speed of the internal fan.
Troubleshooting and Tips
Useful Information
Important notes and tips for appliance operation.
Troubleshooting Scenarios
Common issues and their potential causes and solutions.
Power Outage Handling
How the appliance behaves during and after power interruptions.
Alarm Signals and Codes
Interpreting and responding to various alarm messages.
Cleaning and Maintenance Procedures
Precautions Before Cleaning
Safety measures and checks before performing cleaning.
Routine Cleaning Procedure
Regular cleaning tasks for optimal performance.
Non-Routine Cleaning
Periodic deep cleaning procedures.
Annual Cleaning Procedure
Annual maintenance tasks for the appliance.
Cleaning Ceramic Glass
Instructions for cleaning the appliance's glass door.
Cleaning the Flue
Procedure for cleaning the flue gas system.
General Maintenance
Periodic checks and servicing by qualified personnel.
Warranty Information
Warranty Coverage and Exclusions
Details on parts covered and excluded from the warranty.
Need help?
Do you have a question about the HRV TORSBY and is the answer not in the manual?
Questions and answers