Table of Contents
Advertisement
17. Locate the SCSI signal cable that comes with this option kit.
18. Locate the power cable that comes with this option kit.
68
xSeries 255 Type 8685: Hardware Maintenance Manual and Troubleshooting Guide
a. Connect the end of the cable that is labeled "HDD backplane" to the new
6-Pack hot-swap drive backplane.
b. Route the SCSI signal cable through the opening in the adapter-support
bracket. Do not connect the cable to the adapter at this time.
Attention:
Do not block the ventilated space in front of the fan assembly.
SCSI cable
a. Remove the protective cover from the end of the cable and connect one
end of the cable to the lower power backplane connector.
b. Connect the other end of the cable (labeled "HDD2") to the new 6-Pack
hot-swap drive backplane.
SCSI cable
connector
Adapter
SCSI cable
connector
SCSI backplane
12 V Power
Power backplane signal
SCSI backplane power (standard)
SCSI backplane power (optional)
Advertisement
Table of Contents
