Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KERN FEJ 33K-4M
Summarization of Contents
Piece Counting Operations
Select Piece Counting Function
Guide to selecting the piece counting application.
Weighing Reference Sample for Counting
Weighing a sample to set the reference quantity for counting.
Numerical Input of Piece Weight
Manually entering the weight of a single piece for counting.
Unpacking, Installation, and Commissioning
Installation Site and Location
Advice on selecting an optimal location for accurate weighing.
Placing the Balance Components
Instructions on how to position the weighing platform and terminal.
Mains Connection and Power Up
Guidance on connecting the balance to the power supply.
Basic Operation Guide
Powering the Balance On and Off
Instructions for powering the balance on and off.
Zeroing the Balance
How to set the balance display to zero before weighing.
Taring Functionality
Procedure for subtracting the weight of a container.
Weighing with Tolerance Ranges
Selecting Tolerance Weighing Function
How to enable and configure tolerance checking.
Setting Tolerance Values
Defining the acceptable lower and upper weight limits.
Balance Adjustment Procedures
External Weight Adjustment
Procedure for calibrating the scale using external weights.
Internal Weight Adjustment
Using the built-in weight for calibration.
Setting Adjustment Reminders
Configuring notifications for when recalibration is needed.
Interface and Communication Settings
RS-232C Interface for Data Transfer
Connecting the scale to external devices via RS-232C.
Communication Settings Configuration
Configuring parameters like baud rate and parity for data transfer.
Troubleshooting and Error Messages
Error Message Reference
Listing common errors and their possible causes/solutions.
Need help?
Do you have a question about the FEJ 33K-4M and is the answer not in the manual?
Questions and answers