Related Manuals for Absen NX1.5
Summarization of Contents
Safety Information
General Safety Precautions
Essential safety measures and precautions for operating the product safely.
Electrical Safety and Grounding
Guidance on electrical safety, grounding, and power connection requirements.
Fire, Injury, and Load Safety
Warnings and precautions related to fire hazards, personal injury, and suspended loads.
Product Disposal Guidelines
Information regarding the recycling and proper disposal of product components.
Regulatory Compliance and Interference
Notes on FCC compliance, radio frequency energy, and interference mitigation.
Product Introduction
Application Scenarios and Use Cases
Details on various indoor environments and use cases for the NX series.
Key Features and Structural Design
Highlights structural design, module connections, and cabinet materials.
Advanced Features and Performance
Covers dual brightness, signal/power backup, pixel ratio, and calibration technology.
Product Parameters
800nits Brightness Specifications
Technical specifications for 800nits brightness configuration of NX series cabinets.
1500nits Brightness Specifications
Technical specifications for 1500nits brightness configuration of NX series cabinets.
Product Components and Dimensions
Cabinet Size Drawings and Dimensions
Illustrations detailing the dimensions and mounting points of NX series cabinets.
Module Size Drawings
Illustrations detailing the dimensions of the NX series LED modules.
Cabinet Component Identification
Overview of main components on the 960*540mm and 240*540mm cabinets.
Product Installation
Stacking Installation Procedures
Detailed steps and accessories for stacking NX series cabinets.
Hanging Installation Procedures
Detailed steps and accessories for hanging NX series cabinets.
Wall Mounting Procedures
Instructions for wall mounting NX series cabinets with various splicing configurations.
Frame Kit Installation
Procedures for installing frame kits for NX series cabinets.
Trim Pieces Installation
Guide for installing trim pieces, including specifications and principles.
Product Wiring
Pre-Connection Checks and Preparation
Steps for checking power and control signal connections before powering up.
Power Cable Connections
Detailed instructions for connecting power cables between cabinets and to the power source.
Signal Cable Connections
Guidance on connecting RJ45 CAT5 network cables for signal transmission.
Electrical Circuit Testing
Procedure to test for short circuits using a multimeter before energizing the system.
Product Maintenance
Required Maintenance Tools
List of essential tools for performing maintenance tasks on the product.
Module Maintenance Procedures
Step-by-step guide for removing and replacing LED modules.
Component Maintenance (HUB/Card/PSU)
Maintenance procedures for HUB boards, receiving cards, and power supply units.
Maintenance Precautions
Key precautions for powering, cleaning, and storing the LED display.
Troubleshooting Common Issues
Solutions for common issues like modules not lighting, screen off, or image problems.
Need help?
Do you have a question about the NX1.5 and is the answer not in the manual?
Questions and answers