Table of Contents
Advertisement
Quick Links
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to
read through this manual completely.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without
notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any
misprints or errors, please inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur
through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur
with respect to any article made using this product.
Company names and product names are trademarks or registered trademarks of their re-
spective holders.
Copyright © 2023 Roland DG Corporation
https://www.rolangdg.com/
R1-230126
FA02924
Advertisement
Table of Contents
Related Manuals for Roland TrueVIS LG-300
Summarization of Contents
Introduction
Pre-Installation Checks
Essential checks and requirements before proceeding with machine installation.
Machine Documentation Overview
Details the available paper and electronic manuals for the machine.
Placement and Installation Safety
Guidelines for qualified personnel and safety warnings for handling the machine.
Selecting an Installation Site
Criteria for choosing a suitable location, considering environmental and safety factors.
Operating Environment: Temperature and Humidity
Specifies required temperature and humidity ranges for operation and non-operation.
Required Installation Space
Details the necessary dimensions and layout for safe machine operation.
Included Items Verification
List of all components to verify completeness before starting installation.
Air Ventilation Requirements
Importance of proper ventilation due to volatile compounds emitted during printing.
Installation
Assembly and Ink Filling Procedure
Step-by-step guide for assembling the printer and filling it with ink.
Cutting Tool Installation
Instructions for assembling and installing the cutting tool into the machine.
Network Settings Configuration
Steps for network connectivity: fixed IP and direct computer connection.
Software Download and Installation
Guide for downloading and installing necessary software, including Roland DG Connect Hub.
Software RIP Setup
Information on connecting the printer after installing VersaWorks RIP software.
Installation of Ventilating Equipment
Ventilating Equipment Guidelines
Key points for selecting and installing ventilation devices for safe operation.
Appendix
Power and Serial Number Label Location
Identifies the physical location of labels with serial number and power specifications.
Machine Specifications
Detailed technical specifications for LG-640, LG-540, and LG-300 models.
Need help?
Do you have a question about the TrueVIS LG-300 and is the answer not in the manual?
Questions and answers