Biostar TP45E XE - BIOS Manual page 38

TP45E XE BIOS M anual
Integrated Memory Test
Integrat ed Memory T est allows users to test memory module compatibilities without
additional device or sof tw are.
Step 1:
T his item is disabled on default; change it to " Enable" to precede memory test.
Main Advanced PCIPnP
Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
Over Clock Retry Count
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
Enhanced Mode
> DRAM Timing Configuration
> Clock Gen Configuration
> Voltage Configuration
Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Step 2:
When the process is done, change the setting back from "Enabled" to "Disabled" to
complete the test.
Main Advanced PCIPnP
Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
Over Clock Retry Count
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
Enhanced Mode
> DRAM Timing Configuration
> Clock Gen Configuration
> Voltage Configuration
Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot Chipset O.N.E
[Normal]
[V6-Tech Engine]
[Enabled]
[ x8.0]
[200]
[3]
[Auto]
[Auto]
[Enabled]
BIOS SETUP UTILITY
Boot Chipset O.N.E
[Normal]
[V6-Tech Engine]
[Enabled]
[ x8.0]
[200]
[3]
[Auto]
[Auto]
[Disabled]
37
Exit
Options
Disabled
Enabled
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit
Options
Disabled
Enabled
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit