Biostar TP43 HP Setup Manual
Hide thumbs Also See for TP43 HP:

Advertisement

Quick Links

TP45 HP/TP43 HP Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP43 HP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Biostar TP43 HP

  • Page 1 TP45 HP/TP43 HP Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    Table of Contents Chapter 1: Introduction ............1 Before You Start..................1 Package Checklist ..................1 Motherboard Features................2 Rear Panel Connectors................3 Motherboard Layout (TP45 HP)............. 4 Motherboard Layout (TP43 HP)............. 5 Chapter 2: Hardware Installation ..........6 Installing Central Processing Unit (CPU) ..........6 FAN Headers....................
  • Page 3: Chapter 1: Introduction

    TP45 HP/TP43 HP CHAPTER 1: INTRODUCTION EFORE TART Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
  • Page 4: Motherboard Features

    Motherboard Manual OTHERBOARD EATURES TP45 HP TP43 HP LGA 775 LGA 775 Intel Core2Duo / Core2Quad / Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx processor Celeron 4xx processor Supports Execute Disable Bit / Enhanced Intel Supports Execute Disable Bit / Enhanced Intel SpeedStep®...
  • Page 5: Rear Panel Connectors

    Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA OS Support Biostar Reserves the right to add or remove Biostar Reserves the right to add or remove support for any OS with or without notice support for any OS with or without notice...
  • Page 6: Motherboard Layout (Tp45 Hp)

    Motherboard Manual (TP45 HP) OTHERBOARD AYOUT JKBMS1 JCFAN1 JATXPWR1 LGA775 CPU1 JUSB2 JUSBV1 JUSB1 JATXPWR2 JNFAN1 Intel JRJ45USB1 JAUDIO1 PEX1_2 JCMOS1 PEX16_1 JPE1 JPE3 JPE5 JPE7 JCDIN1 Intel IDE1 ICH10 JPE2 JPE4 JPE6 JPE8 PEX1_1 BAT1 JPE9 PEX16_2 CODEC SATA5 SATA3 SATA1 PCI1...
  • Page 7: Motherboard Layout (Tp43 Hp)

    TP45 HP/TP43 HP (TP43 HP) OTHERBOARD AYOUT JKBMS1 JCFAN1 JATXPWR1 LGA775 CPU1 JUSB2 JUSBV1 JUSB1 JATXPWR2 JNFAN1 Intel JRJ45USB1 JAUDIO1 JCMOS1 PEX16_1 JCDIN1 Intel IDE1 ICH10 PEX1_1 BAT1 PEX16_2 CODEC SATA5 SATA3 SATA1 PCI1 Super JSPDIF_OUT1 PCI2 SATA6 SATA4 SATA2 JUSBV2 JAUDIOF1 JCOM1 JPRNT1...
  • Page 8: Chapter 2: Hardware Installation

    Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION (CPU) NSTALLING ENTRAL ROCESSING Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
  • Page 9 TP45 HP/TP43 HP Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.
  • Page 10: Fan Headers

    Motherboard Manual FAN H EADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
  • Page 11: Installing System Memory

    TP45 HP/TP43 HP NSTALLING YSTEM EMORY A. Memory Modules Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
  • Page 12 Motherboard Manual B. Memory Capacity DIMM Socket Total Memory DDR2 Module Location Size DDR2_A1 256MB/512MB/1GB/2GB DDR2_A2 256MB/512MB/1GB/2GB Max is 8GB. DDR2_B1 256MB/512MB/1GB/2GB DDR2_B2 256MB/512MB/1GB/2GB C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table.
  • Page 13: Connectors And Slots

    TP45 HP/TP43 HP ONNECTORS AND LOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. IDE1: IDE/ATAPI Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
  • Page 14 Motherboard Manual PEX16_1: PCI-Express Gen2 x16 (x16/CrossFire x8 Speed) Slot (For TP45 HP Only) PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s(4GB/s CrossFire) simultaneously per direction, for an aggregate of 16GB/s(8GB/s CrossFire) totally. PEX16_1 slot is reserved for graphics or video cards. The design of this motherboard supports dual PCI-Express graphics cards using CrossFire technology with multiple displays.
  • Page 15 TP45 HP/TP43 HP PEX1_1/PEX1_2(for TP45 HP Only): PCI-Express x1 Slots PCI-Express 1.1 compliant. Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth over the PCI architecture. For TP43 HP, if PEX16_2 is inserted with PCI-E x4 device, then PEX1_1 will not be functional.
  • Page 16: Chapter 3: Headers & Jumpers Setup

    Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP OW TO ETUP UMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin1-2 closed...
  • Page 17 TP45 HP/TP43 HP JATXPWR2: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Assignment Assignment +3.3V +3.3V -12V +3.3V Ground Ground PS_ON Ground Ground Ground Ground Ground PW_OK Standby Voltage+5V +12V +12V Ground +3.3V...
  • Page 18 Motherboard Manual J1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance. Assignment +12V Ground Ground SATA1~SATA6: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 6 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
  • Page 19 TP45 HP/TP43 HP JUSB3/JUSB4/JUSB5: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. Assignment +5V (fused) +5V (fused) USB-...
  • Page 20: Clear Cmos Procedures

    Motherboard Manual JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. Assignment Left Channel Input Ground Ground Right Channel Input JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard.
  • Page 21 TP45 HP/TP43 HP JUSBV1/JUSBV2: Power Source Headers for USB/PS2 Ports Pin 1-2 Close: JUSBV1: +5V for USB/PS2 ports at JKBMS1/JUSB1/JUSB2/JRJ45USB1. JUSBV2: +5V for USB ports at JUSB3/JUSB4/JUSB5. Pin 2-3 Close: JUSBV1: +5V STB for USB/PS2 ports at JKBMS1/JUSB1/JUSB2/JRJ45USB1. JUSBV2: +5V STB for USB ports at JUSB3/JUSB4/JUSB5. Pin 1-2 close JUSBV1 JUSBV2...
  • Page 22 Motherboard Manual On-Board Buttons There are 2 on-board buttons. RSTSW1 PWRSW1 PWRSW1: This is an on-board Power Switch button. RSTSW1: This is an on-board Reset button. JPRNT1: Printer Port Connector This header allows you to connect printer on the PC. Assignment Assignment -Strobe...
  • Page 23 TP45 HP/TP43 HP JCOM1: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port. Assignment Carrier detect Received data Transmitted data Data terminal ready Signal ground Data set ready Request to send Clear to send Ring indicator JPE1~JPE9: CrossFire Switch Jumpers (For TP45 HP Only) The setting of these jumpers determines the operation mode of PEX16_1 and PEX16_2.
  • Page 24: Chapter 4: Crossfire Function (For Tp45 Hp)

    Motherboard Manual CHAPTER 4: CROSSFIRE FUNCTION (FOR TP45 HP) EQUIREMENTS Only Windows XP/Vista supports CrossFire (Dual Video) function. Two identical CrossFire-ready graphics cards that are ATI certified. The graphics card driver should support CrossFire technology. The power supply unit must provide at least the minimum power required by the system, or the system will be unstable.
  • Page 25 TP45 HP/TP43 HP Step 2: Insert the two CrossFire-Ready graphics cards into PEX16_1 (Master) and PEX16_2 (Slave) PEX16_1(Mas ter ) PEX16_2(Slave) Notice: Make sure both the graphics cards are seated into slots completely. Auxiliary Power Step 3: Connect a 4-pin ATX power cable to Connector (J1), this will ensure the stabilization of your system.
  • Page 26: Chapter 5: T-Series Bios & Software

    Motherboard Manual CHAPTER 5: T-SERIES BIOS & SOFTWARE BIOS ERIES T-Series BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery System (S.R.S) Smart Fan Function CMOS Reloading Program !! WARNING !! For better system performance, the BIOS firmware is being...
  • Page 27: Cpu Frequency Setting

    TP45 HP/TP43 HP Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize personal overclock settings. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Chipset O.N.E Exit Over-Clocking Navigator setting Options WARNING: Setting wrong values in below sections Normal may cause system to malfunction.
  • Page 28: Dram Frequency

    Motherboard Manual Over Clock Retry Count This item allows you to set the overclock fail retry times. FSB(Bsel) To NorthBridge Latch This item allows you to select the FSB Frequency. DRAM Frequency To get better system performance, sometimes downgrading the memory frequency is necessary when CPU frequency is adjusted over the upper limit.
  • Page 29 TP45 HP/TP43 HP V6 Tech Engine This engine will make a good over-clock performance. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Chipset O.N.E Exit Over-Clocking Navigator setting Options WARNING: Setting wrong values in below sections V6-Tech Engine may cause system to malfunction. V8-Tech Engine Over-Clocking Navigator [Automate OverClock]...
  • Page 30 Motherboard Manual Notices: Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under “Overclocking Navigator Engine” item. MIT allows users to test memory compatibilities, and no extra devices or software are needed.
  • Page 31 TP45 HP/TP43 HP C. BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12> during the Power-On Self Tests (POST) procedure while booting up.
  • Page 32 Motherboard Manual D. Self Recovery System (S.R.S.) This function can’t be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured.
  • Page 33 TP45 HP/TP43 HP Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Fan Ctrl OFF(℃) If the CPU/System temperature is lower than the set value, the CPU/ System fan will turn off.
  • Page 34: T-Series Software

    Motherboard Manual ERIES OFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software title.
  • Page 35 TP45 HP/TP43 HP Over Clock Panel Restore Default Settings AUTO Over-Clock V3/V6/V9 Engine Real-time Ove r-clock Manual Adjust CPU Clock Test & Apply Manual Setting s AUTO User can click this button and the utility will set the best and stable performance and frequency automatically.
  • Page 36 Motherboard Manual Then the utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, launch the utility again and the utility will load the previously verified best and stable frequency. V3 / V6 / V9 Provide user the ability to do real-time over-clock adjustment.
  • Page 37 TP45 HP/TP43 HP Over Voltage Panel Manual Adjust CPU/Memo ry/Chipset/FSB Voltage CPU Voltage This function allows user to adjust CPU voltage. Click on “+” to increase or “-“ to decrease the CPU voltage. Memory Voltage This function allows user to adjust Memory voltage. Click on “+” to increase or “-“...
  • Page 38: Hardware Monitor

    Motherboard Manual About Panel In this panel, you can get model name and other system information that may related to over-clocking. You can also get the version number of this software. Note Because the Over Clock and Over Voltage features are controlled by several separate chipset, the utility divides these features to separate panels.
  • Page 39 TP45 HP/TP43 HP eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.
  • Page 40 If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar.com.tw/app/en-us/about/contact.php for getting our contact information.
  • Page 41: Bios Update

    TP45 HP/TP43 HP BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. Show current BIOS information AWARD BIOS AMI BIOS Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file...
  • Page 42 Motherboard Manual <Update BIOS> Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS.
  • Page 43: Chapter 6: Useful Help

    TP45 HP/TP43 HP CHAPTER 6: USEFUL HELP RIVER NSTALLATION After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system.
  • Page 44: Extra Information

    Motherboard Manual XTRA NFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.
  • Page 45: Ami Bios Beep Code

    TP45 HP/TP43 HP AMI BIOS B Boot Block Beep Codes Number of Beeps Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected...
  • Page 46: Troubleshooting

    Motherboard Manual 6.4 T ROUBLESHOOTING Probable Solution No power to the system at all Make sure power cable is Power light don’t illuminate, fan securely plugged in. inside power supply does not turn Replace cable. Contact technical support. Indicator light on keyboard does not turn on.
  • Page 47 TP45 HP/TP43 HP This page is intentionally left blank.
  • Page 48: Appendencies: Spec In Other Language

    Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE ERMAN TP45 HP TP43 HP LGA 775 LGA 775 Intel Core2Duo / Core2Quad / Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Prozessoren Celeron 4xx Prozessoren Unterstützt Execute Disable Bit / Enhanced Intel Unterstützt Execute Disable Bit / Enhanced Intel...
  • Page 49 244 mm (B) X 305 mm (L) Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Biostar behält sich das Recht vor , ohne Biostar behält sich das Recht vor , ohne OS-Unterstüt Ankündigung die Unterstützung für ein Ankündigung die Unterstützung für ein...
  • Page 50: France

    Motherboard Manual RANCE TP45 HP TP43 HP LGA 775 LGA 775 Processeurs Intel Core2Duo / Core2Quad / Processeurs Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Prend en charge les technologies d'exécution de Prend en charge les technologies d'exécution de bit de désactivation / Intel SpeedStep®...
  • Page 51 Windows 2000 / XP / VISTA Windows 2000 / XP /VISTA Support SE Biostar se réserve le droit d'ajouter ou de Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.
  • Page 52: Italian

    Motherboard Manual TALIAN TP45 HP TP43 HP LGA 775 LGA 775 Processore Intel Core2Duo / Core2Quad / Processore Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Supporto di Execute Disable Bit / Enhanced Supporto di Execute Disable Bit / Enhanced Intel SpeedStep®...
  • Page 53 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Sistemi Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o operativi rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema supportati operativo senza preavviso.
  • Page 54: Spanish

    Motherboard Manual PANISH TP45 HP TP43 HP LGA 775 LGA 775 Procesador Intel Core2Duo / Core2Quad / Procesador Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Admite Bit de deshabilitación de ejecución / Intel Admite Bit de deshabilitación de ejecución / Intel SpeedStep®...
  • Page 55 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA sistema Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar operativo el soporte de cualquier SO con o sin aviso previo.
  • Page 56: Portuguese

    Motherboard Manual ORTUGUESE TP45 HP TP43 HP LGA 775 LGA 775 Processador Intel Core2Duo / Core2Quad / Processador Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Suporta as tecnologias Execute Disable Bit / Suporta as tecnologias Execute Disable Bit / Enhanced Intel SpeedStep®...
  • Page 57 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Sistemas A Biostar reserva-se o direito de adicionar ou A Biostar reserva-se o direito de adicionar ou operativos remover suporte para qualquer sistema remover suporte para qualquer sistema suportados operativo com ou sem aviso prévio.
  • Page 58: Polish

    Motherboard Manual OLISH TP45 HP TP43 HP LGA 775 LGA 775 Procesor Intel Core2Duo / Core2Quad / Procesor Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Procesor Obsługa Execute Disable Bit / Enhanced Intel Obsługa Execute Disable Bit / Enhanced Intel SpeedStep®...
  • Page 59 244 mm (S) X 305 mm (W) płyty Obsluga Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA systemu Biostar zastrzega sobie prawo dodawania lub Biostar zastrzega sobie prawo dodawania lub operacyjne odwoływania obsługi dowolnego systemu odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.
  • Page 60: Russian

    Motherboard Manual USSIAN TP45 HP TP43 HP LGA 775 LGA 775 Процессор Intel Core2Duo / Core2Quad / Процессор Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / (центральн Celeron 4xx Celeron 4xx ый...
  • Page 61 панели Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Поддержка Biostar сохраняет за собой право добавлять Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или удалять средства обеспечения для OS с...
  • Page 62: Arabic

    Motherboard Manual RABIC TP43 HP TP45 HP LGA 775 LGA 775 ‫ﻣﻌﺎﻟﺠﺎت‬Intel Core2Duo / Core2Quad / ‫ﻣﻌﺎﻟﺠﺎت‬Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx ‫اﻟﻤﻌﺎﻟﺠﺔ‬ ‫ﺣﺪة‬ ‫و‬ ‫ﺼﻞ...
  • Page 63: Pci Express

    ‫ﻣﻘﺒﺲ ﺹﻮت‬ ‫ارﺕﻔﺎع‬ ‫ﻣﻢ‬ ‫ﻋﺮض‬ ‫ﻣﻢ‬ ‫ارﺕﻔﺎع‬ ‫ﻣﻢ‬ ‫ﻋﺮض‬ ‫ﻣﻢ‬ ‫اﻝﻠﻮﺣﺔ‬ ‫ﺣﺠﻢ‬ Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA ‫ ﺕﺤﺘﻔﻆ‬Biostar ‫ ﺕﺤﺘﻔﻆ‬Biostar ‫ﺏﺈﺧﻄﺎر‬ ‫ﺕﺸﻐﻴﻞ‬ ‫ﻥﻈﺎم‬ ‫ﻷي‬ ‫اﻝﺪﻋﻢ‬ ‫إزاﻝﺔ‬ ‫أو‬ ‫إﺿﺎﻓﺔ‬ ‫ﻓﻲ‬ ‫ﺏﺤﻘﻬﺎ‬ ‫ﺏﺈﺧﻄﺎر‬ ‫ﺕﺸﻐﻴﻞ‬...
  • Page 64: Japanese

    Motherboard Manual APANESE TP45 HP TP43 HP LGA 775 LGA 775 Intel Core2Duo / Core2Quad / Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx processor Celeron 4xx processor Execute Disable Bit / Enhanced Intel Execute Disable Bit / Enhanced Intel SpeedStep®...
  • Page 65 背面パネル LANポート LANポート USBポート USBポート オーディオジャック オーディオジャック ボードサイズ 244 mm (幅) X 305 mm (高さ) 244 mm (幅) X 305 mm (高さ) Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま たは削除する権利を留保します。 たは削除する権利を留保します。 2008/05/07...

This manual is also suitable for:

Tp45 hpTp45exe

Table of Contents