Related Manuals for T Scale NHB-600
Summarization of Contents
SPECIFICATION
Dimension
Physical dimensions of the NB-NHB series precision balance.
Technical Specifications
Detailed technical specifications including capacity, readability, and tare range.
Common Specifications
General operational specifications like interface, temperature, and power supply.
Load Cell Specifications
Technical details of the load cell used in the balance.
INSTALLATION
Unpacking
Instructions for safely removing the balance from its packaging.
Level Adjusting
Procedure for ensuring the balance is correctly leveled for accurate readings.
Charging Battery
Guidelines for charging the internal rechargeable battery.
DESCRIPTION
Key Board Layout
Overview and function of each key on the balance's control panel.
Display Indicators
Explanation of various symbols and indicators shown on the balance display.
OPERATION
Power ON/OFF and Zeroing
Steps for turning the scale on/off and setting the display to zero.
Tare Function
How to use the tare function to exclude container weight.
Weighing Unit Selection
Changing the measurement unit (e.g., grams, carats).
Percent Weighing
Utilizing the scale for percentage-based measurements.
Parts Counting Operation
How to perform parts counting using sample quantities.
Accumulation Function
Using the scale to accumulate multiple weight readings.
Memory Recall and Clear
Retrieving or clearing accumulated weight data from memory.
Automatic Accumulation and Backlight
Enabling automatic accumulation and adjusting backlight settings.
PARAMETERS
Backlight Settings
Configure backlight behavior (auto, always on/off).
Communication and Data Output
Configure RS232/USB selection, data transmission, and wireless options.
Accumulation and Unit Configuration
Manage accumulation function and unit settings.
Password Access
Enter the password for settings.
Calibration Setup Options
Access normal calibration procedures.
Internal Counts Display
Display internal counts indication.
Gravity and Capacity Settings
Adjust local gravity and capacity settings.
AD Speed and Tare Operation
Set AD speed and multi-tare functionality.
CALIBRATION
Linear Calibration
Procedure for linear calibration of the balance.
Normal Calibration
Procedure for standard calibration of the balance.
RS-232 OUTPUT
RS-232 Specifications
Technical details of the RS-232 interface and communication.
RS-232 Connector Pinout
Diagram and explanation of the 9-pin D-type connector.
Data Output Protocol
Format and structure of the continuous data output.
Need help?
Do you have a question about the NHB-600 and is the answer not in the manual?
Questions and answers