Related Manuals for Steris AMSCO 7053HP
Summarization of Contents
Safety Precautions for AMSCO 7000 Series Washer/Disinfector
Introduction to Safety Precautions
Details essential safety information for uncrating, installing, operating, and servicing the equipment.
Key Safety Precautions
Covers warnings for personal injury, equipment damage, electric shock, chemical hazards, and burns.
Symbols and Labels Guide
Equipment Symbols Explained
Defines symbols found on washer/disinfector components, indicating hazards and functions.
Nameplate Symbols and Definitions
Explains symbols typically found on the equipment's identification nameplate.
Component Identification and Features
Washer/Disinfector General Overview
Introduces major components and controls of the AMSCO 7000 Series Washer/Disinfector.
Control System Description
Details the touch screen interface, operation modes, and system controls.
Emergency Safety Features
Highlights critical safety features like Emergency Stop and door interlocks.
AMSCO 7052HP Washer/Disinfector Accessories
Lists and describes accessories compatible with the AMSCO 7052HP model.
AMSCO 7053HP Washer/Disinfector Accessories
Lists and describes accessories compatible with the AMSCO 7053HP model.
Chemicals and Cycles Guide
Provides information on recommended chemicals and their use in various cycles.
Operating Instructions and Procedures
Introduction to Operating Instructions
Provides essential warnings and cautions before operating the equipment.
Pre-Operation Equipment Checks
Details the necessary steps to perform before operating the washer/disinfector.
Manual Loading Procedures
Step-by-step guide for manually loading items into the washer/disinfector.
Loading with Automation Systems
Instructions for loading when using ATLAS or SCS conveyor systems.
Typical Cycle Operation
Explains the process and monitoring of a typical cycle execution.
Unloading Procedures
Guides for safely unloading processed items from the washer/disinfector.
Responding to Alarms
Provides steps to acknowledge and address alarm conditions.
Shutdown and Standby Procedures
Covers safe shutdown and standby modes for the equipment.
Cycle and Control Value Programming
General Cycle Programming Information
Overview of factory-preset cycles and custom cycle creation.
Supervisor Mode Menu Navigation
Details how to access and navigate the Supervisor mode menus.
Cycles Menu for Customization
Explains how to create, copy, and modify cycles within the Supervisor mode.
Formatting USB Key for Data Transfer
Instructions on how to format a USB key for compatibility with the device.
Routine Maintenance Procedures
Preventive Maintenance Guidelines
Emphasizes the importance of preventive maintenance and contacting STERIS.
Routine Maintenance Check List
Provides a checklist for regular operator-performed maintenance tasks.
Cleaning the Debris Screen
Step-by-step guide for cleaning the debris screen in the chamber sump.
Performing the Decontamination Cycle
Instructions for running the DECONTAMINATION cycle for cleaning and descaling.
Performing the Door Safety Test
Procedure to verify the security of both chamber doors.
Performing the Sump Safety Level Test
Procedure to verify the water level in the washer/disinfector sump.
Performing the Water Inlet Pressure Test
Procedure to check water inlet pressure and temperature.
Verifying Emergency Stop Pushbuttons
Instructions to test the functionality of emergency stop pushbuttons.
Troubleshooting Common Issues
Introduction to Troubleshooting
Guides users on how to use the troubleshooting section and safety precautions.
General Troubleshooting Guidance
Provides general warnings and advice for troubleshooting the equipment.
Abnormal Conductivity Readings
Addresses issues with conductivity readings during thermal rinse draining.
Abnormal Noise Issues
Troubleshooting steps for unusual noises generated by the washer/disinfector.
Low Air Pressure Warnings
Guidance for resolving warnings related to insufficient air pressure.
Excessive Foaming During Pre-Wash
Solutions for excessive foaming during the pre-wash phase.
System Error: Cycles Reset to Default
Troubleshooting for critical errors where cycles reset to default values.
Load Door Open Alarm
Steps to resolve non-critical alarms for the load door not opening.
Low Pressure Detected Alarm
Troubleshooting steps for alarms indicating low pressure.
Need help?
Do you have a question about the AMSCO 7053HP and is the answer not in the manual?
Questions and answers