Related Manuals for MTU 12 V 2000 M70
Summarization of Contents
Safety
General Safety Conditions
General safety requirements and correct use of the engine.
Personnel and Transport Safety
Requirements for qualified personnel and safe transport of the engine.
Startup, Operation, and Maintenance Safety
Safety regulations for startup, operation, and maintenance work.
Fire Prevention and Environmental Protection
Guidelines for fire prevention, environmental protection, and use of auxiliary materials.
General Information
Product Description and Engine Overview
Detailed description of the engine, its systems, and model designations.
Technical Data
8V 2000 M70 Engine Data
Technical specifications for the 8V 2000 M70 engine.
12V 2000 M70 Engine Data
Technical specifications for the 12V 2000 M70 engine.
16V 2000 M70 Engine Data
Technical specifications for the 16V 2000 M70 engine.
Firing Order and Dimensions
Firing orders and main engine dimensions for various models.
Operation
LOP Controls Overview
Explanation of the Local Operating Panel (LOP) controls and their functions.
Engine Startup Procedures
Step-by-step guides for putting the engine into operation and starting it.
Engine Shutdown and Emergency Stop
Procedures for stopping the engine and initiating an emergency stop.
Clutch and Waterjet Operations
Instructions for engaging, disengaging the clutch, and flushing the waterjet.
Operational Checks
Routine checks to be performed during engine operation.
After Stopping the Engine
Actions to take after the engine has been stopped.
Plant Cleaning
Instructions for cleaning the plant using steam jet or high-pressure cleaning.
Maintenance
Maintenance Task Reference Table
Reference table for maintenance tasks and their corresponding page numbers.
Troubleshooting
Engine Performance and System Issues
Common engine problems, causes, and troubleshooting steps for various systems.
LOP Alarms and Fault Diagnosis
Explanation of LOP alarms and guidance for diagnosing system faults.
Task Descriptions
Engine Barring and Cranking
Procedures for barring and cranking the engine.
Cylinder Liner Inspection
Procedure for inspecting the cylinder liner using an endoscope.
Crankcase Breather Maintenance
Tasks for cleaning and replacing oil separator elements in the crankcase breather.
Valve Clearance Check and Adjustment
Procedure for checking and adjusting valve clearance.
Injection Pump and Injector Service
Procedures for replacing and servicing injection pumps and injectors.
Fuel System Maintenance
Tasks related to fuel filter, prefilter, and fuel system venting.
Lube Oil System Maintenance
Procedures for checking and changing engine oil, and replacing the oil filter.
Coolant System Maintenance
Tasks for checking, draining, and filling engine coolant.
LOP Testing and Diagnostics
Procedures for cleaning, inspecting, and testing the Local Operating Panel (LOP).
Appendices
Abbreviations and Special Tools
Glossary of abbreviations and list of special tools required for maintenance.
Need help?
Do you have a question about the 12 V 2000 M70 and is the answer not in the manual?
Questions and answers