Related Manuals for Siemens 7KT0308
Summarization of Contents
Introduction
Purpose of Document
Defines the manual's scope and intended audience.
Required Basic Knowledge
Outlines the necessary technical knowledge for understanding the manual.
Product Components
Lists the items included in the product package.
Safety Precautions
Danger Warnings
Critical warning about hazardous voltage and potential for severe injury or death.
Notice Information
Important information regarding installation, environment, and testing precautions.
Caution Advisories
Advisories on reading instructions, electric shock risk, and operational proximity.
Technical Specification
Measurements Overview
Details on measurement procedures, voltage curve, and frequency characteristics.
Supply Voltage Details
Information regarding the design and type of the device's power supply.
Degree of Protection
Specifies IP protection classes for the front and terminals.
Suitability for Operation
Defines the conditions under which the device is suitable for operation.
Product Functions List
Lists all the measurement and monitoring functions the product offers.
Display and Operation Details
Details about the display type, dimensions, and user interface elements.
Fault Limits and Accuracy
Specifies accuracy classes and conditions for metering.
Inputs and Outputs
Information on the device's digital input and output capabilities.
Measuring Inputs Specifications
Data on voltage and current measuring ranges and extension capabilities.
Connection Types
Describes the type of electrical connections for voltage and current inputs.
Mechanical Design Specifications
Provides physical dimensions, weight, and mounting specifications.
Environmental Conditions
Lists operating and storage temperature, humidity, and altitude limits.
IEC Standards Compliance
Details compliance with relevant international standards.
Certifications and Compliance
Mentions conformity to IPC electronics assembly and ROHS standards.
Assembly
Installation Procedures
Guide for preparing panel cutout and installing the meter.
Installation Guidelines
Rules for built-in equipment installation and safety considerations.
Wiring Guidelines
Instructions for proper and safe wiring practices.
Demounting the Meter
Step-by-step instructions for removing the meter from its installation.
Connection
Typical Wiring Diagrams
Illustrates wiring configurations for various power systems.
Wiring Diagrams Continued
Continues wiring diagrams for single-phase systems.
Terminal Connections Overview
Shows the physical terminal layout and connections for the device.
Configuration
Parameter Reading Methods
How to use device keys to access and read meter parameters.
Automatic vs Manual Mode
Explanation of automatic and manual operation modes for parameter display.
Password for Configuration
Procedure for entering the default password to access configuration settings.
Configuration Setting Mode
Details on navigating and changing device settings using function keys.
Parameterization with Keys
Table detailing parameter settings and their configuration options via keys.
Parameter Reading
Online Page 1 Parameters
Details parameters displayed on the first online parameter screen.
Online Page 2 Parameters
Lists parameters displayed on the second online parameter screen.
Online Page 3 Parameters
Details parameters displayed on the third online parameter screen.
Online Page 4 Parameters
Describes parameters displayed on the fourth online parameter screen.
Page 4 and Energy Parameters
Parameters for the fourth online page and energy readings.
Communication
Protocol and Interface Details
Details on Modbus RTU protocol and RS485 interface.
Communication Parameters
Settings for communication like address, mode, speed, parity.
Communication Connection Diagram
Visual representation of the communication setup.
Modbus Register Address List
Table of readable Modbus registers and their parameters.
Modbus Register Address List (Part 2)
Continuation of the list of Modbus registers.
Modbus Register Address List (Part 3)
Further details on Modbus registers.
Modbus Register Address List (Part 4)
Extends the list of Modbus registers.
Readable Parameters (Integer Data)
List of readable parameters with integer data structure.
Maintenance
Maintenance Guidelines
Recommendations for cleaning and upkeep of the equipment.
Disposal and Recycling
Instructions for proper module disposal according to regulations.
Need help?
Do you have a question about the 7KT0308 and is the answer not in the manual?
Questions and answers