Table of Contents
Advertisement
FLIP-FLOP™
FLIP-FLOP™
This feature is kind of "auto pilot". When you are using the Velocity™ and an American Audio®
"Q"- Series mixer, you can have one player begin playback when the other ends. You can "Flip -Flop™" single
tracks, the entire disc, or a combination of the two. This function will not work with the Flash Start™ func-
tion.
To FLIP-FLOP™ single tracks:
1) Connect your system as described in the set up section below.
2) Set your American Audio® "Q" Deck™ mixer's crossfader to the center position.
3) Set both sections of the Velocity™ to playback in single mode, SINGLE (48) should be indicated in the LCD (16).
4) Load both side of the Velocity™ with CDs.
5) After they have both cued, press the PLAY/PAUSE BUTTON (22) on one of your drive to begin playback.
6) After the first player's single track has ended the second player's track will immediately begin playback.
7) FLIP-FLOP™ will continue until you stop it or power is interrupted.
To Flip-Flop entire CDs:
Be sure your drives are both in continuous play mode, be sure SINGLE (48) does not appear in the LCD (16).
Follow all directions for single track FLIP-FLOP™ play above. When one player's disc ends the other player
will immediately begin playback.
Note:
You may combine FLIP-FLOP™ single and continuously playback modes by selecting either single or
continuous playback on your units.
"Q"-START/FLIP-FLOP™ - FLASH START™ SET-UP
Connecting your Velocity™ to an American Audio
Flash Start,™ and Flip Flop™ control: Be sure to connect 1/8" mono mini plugs from
the control connection on the rear your Velocity™ to the 1/8" control jack on the rear
of American Audio
"Q" series mixer. That's it, you'll be set for FLIP-FLOP.™ Note:
®
The Flip-Flop™ function works in conjunction with the Q-Start™ function, therefore
Flip-Flop™ will not function with the Flash Start™ function.
Sample "Q" Start/Flash Start Set-Up. This set-up will allow Q-Start™ and
Flip-Flop™ or Flash Start functions to operate. Be sure to use 1/8" mono
mini plugs only. Please note: Because the Flash Start™ and Q-Start™
functions use the same controller jacks on a mixer one or the other can be
used.
C O N N E C T T O
C O N T R O L U N I T 2
Velocity
A
A
M E R I C A N
U D I O
M O D E L N O . : V E L O C I T Y
D U A L C O M P A C T D I S C P L A Y E R
P O W E R S O U R C E :
~
1 1 5 /2 3 0 V
5 0 /6 0 H z : 2 5 W
M A D E I N T A I W A N
D I G I T A L O U T
A U D I O O U T
F L A S H
C U E
R
L
Compatible Q-Deck Mixer
American Audio
- www.AmericanAudio.us - Velocity™ Instruction Manual Page 37
©
®
"Q" Deck™ mixer for Q-Start,™
®
A C I N ~
C O N N E C T T O
C O N T R O L U N I T 1
1 1 5 V
2 3 0 V
AMERICAN AUDIO
Single black cross line
Mono Mini Plug
Figure 70
D I G I T A L O U T
A U D I O O U T
F L A S H
C U E
R
L
Figure 71
Single black cross line
Advertisement
Table of Contents
