GENERAL FUNCTIONS AND CONTROLS (Cont.)
46
EFFECT
47
SINGLE
48
LOOP
49
RELOOP
50
D. LCD DISPLAY PANEL (FIGURE 6)
46. PLAY INDICATOR - The "PLAY" indicator will
glow when the unit is in play mode.
47. EFFECT INDICATOR - This indicator glows
when any of the nine built-in effects are selected.
48. SINGLE INDICATOR - This indicates that the
CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi-
cator is not on the unit is in continuous mode In
continuous mode the drive will play all the remain-
ing tracks on the disc. Once the remaining tracks
have ended the unit will return to cue mode
49. LOOP - This icon will flash when you are in
loop mode. This icon will glow when a loop has
been created but is not actively playing.
50. RELOOP INDICATOR - Appears when LOOP
is engaged or ready to be engaged.
51. PAUSE INDICATOR - This indicator will glow
when the drive is in pause mode.
52. TRACK INDICATOR - This 2-digit indicator
visually details the current track cued or playing.
53. CUE INDICATOR - This indicator will glow
when the unit is in CUE or mode and will flash
every time a new CUE POINT is set.
54, 55, 56. TIME DISPLAY - These indicators
detail the Minutes, Seconds, and Frames. The
meter will display either the elapse, total, or
remaining time of a track or disc. The time dis-
played in the meter will directly reflect the time
indicator above (ELAPSED (64), TOTAL REMAIN
(63), REMAIN (61) OR REMAINING (62)).
57. MEMORY BUCKET INDICATOR - This indi-
CUE
ELAPSED
00 : 00 00
88
T
51
54
52
53
American Audio
- www.AmericanAudio.us - Velocity™ Instruction Manual Page 15
©
®
TOTAL REMAIN
M
S
55
56
cator serves two functions. The red bucket out-
line details the cue memory status, a full bucket
outline indicates the cue memory is full. The five
bars in the memory bucket detail the anti-shock
memory state. Each bar indicates 2 second of
digital anti-shock. The search functions will not
operate until all the bars are full.
58. PITCH/BPM METER - This meter will display
either the pitch percentage applied by the PITCH
SLIDER (35) or the BPM's.
59. TIME BAR INDICATOR - This bar gives a
visual approximation of a track's or disc's remain-
ing time. This bar will begin to flash when a CD is
ending or a track if the unit is in "SINGLE" mode.
60. LOCK INDICATOR - When this indicator is
on the unit control are in locked, see page 23.
61. P.S.P. INDICATOR - This indicates which, if
any, of the effect presets are in use (1-6).
62. REMAIN INDICATOR - When "REMAIN"
is indicated in the LCD DISPLAY (16) the TIME
DESCRIBED (54, 55, & 56) in the LCD will define
the current track's remaining time.
63. TOTAL/REMAIN
"TOTAL" and "REMAIN"
LCD DISPLAY (16) the TIME DESCRIBED (54,
55, & 56) in the LCD (16) will define the total disc
remaining time.
64. ELAPSE INDICATOR - When this indicator
is on it will define the time displayed in the TIME
METER (54, 55, & 56) as a CD elapsed time or
tracks if the unit is in "SINGLE" mode.
0
160
--
.
F
57
58
INDICATOR
are indicated in the
64
63
62
61
LOCK
60
59
Figure 6
-
When