Related Manuals for Sleipner MAXI 43
Summarization of Contents
Installer Responsibility and Safety
Installer's Duties and Liabilities
Defines the installer's duties and liabilities for product installation.
General Installation and Safety Guidelines
Windlass System Precautions
General safety guidelines applicable to all windlass systems.
MAXI Windlass Specific Precautions
Specific considerations for Sleipner MAXI windlass models.
Installation Preparation
Pre-Installation Checks and First Operation
Ensures proper first operation and includes critical safety checks.
Component Placement and Mounting Guidance
Covers planning component placement, fitting brackets, and rollers.
Rope Management and Routing
Details on anchor rope, safety lines, hull conduits, and line guides.
Auto Stop System Configuration
Explanation and setup for the automatic stop function.
MAXI 31 Windlass Installation
Maxi 31 Stern Mounting
Details on mounting the Maxi 31 windlass on the stern.
MAXI 32 Windlass Installation
Maxi 32 Horizontal Mounting
Instructions for installing the Maxi 32 windlass on a horizontal surface.
MAXI 32 Box Installation
Maxi 32 Boxed Unit Mounting
Steps for installing the Maxi 32 windlass with a fiberglass box.
MAXI 34-G Windlass Installation
Maxi 34-G Vertical Mounting
Guide to fitting the Maxi 34-G vertically on a longitudinal bulkhead.
MAXI 34-D Windlass Installation
Maxi 34-D Deck Mounting
Instructions for horizontal installation of the Maxi 34-D on the fore or aft deck.
MAXI 40 Windlass Installation
Maxi 40 Bulkhead Mounting
Details on fitting the Maxi 40 windlass inside on the stern or bow bulkhead.
MAXI 43/44 Windlass Installation
Maxi 43/44 Bracket Adjustment
Guide for installing the Maxi 43/44, including bracket adjustments.
Auto-stop System Setup
Auto Stop Functionality Explained
Explains the electronic auto stop function and its operation.
Auto Stop Sensor Adjustment
How to adjust the auto stop sensor for proper operation.
Fitting Auto Stop Rope Indicators
Step-by-step guide to fitting brass wire indicators to the rope.
Visual Wiring Diagram
Motor and Battery Cable Connections
Instructions for connecting motor and battery cables to the windlass.
Electrical Installation Procedures
Control Panel Connections
How to connect the Sleipner control panels to the control box.
Auto Stop Sensor Wiring Diagram
Wiring details for connecting the auto stop sensor to the control unit.
Control Unit 150800 Mounting
Guidance on mounting the control unit 150800 in a suitable location.
Maxi Electrical Cable Management
Detailed instructions for connecting motor and battery cables to the control unit.
Windlass Circuit Protection
Main Switch and Circuit Breaker Use
Information on the required main switch and circuit breaker for installation.
Need help?
Do you have a question about the MAXI 43 and is the answer not in the manual?
Questions and answers