Advertisement
Quick Links
P300 Series -
16 & 18 mm versions
For Models:P316, P317, P319, P322, P323, P325, P328, P329, P332 & P340
Updated 06/22
Contents:
Installation Instructions:
Pump Specifications:
Exploded View:
Parts List:
Kits/Torque Specifications:
Pump Mounting Selection Guide:
Trouble Shooting:
Recommended Spare Parts List:
Repair Instructions:
Dimensions:
Warranty Info:
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service Manual
page 2
page 3
page 4
page 5
page 6
page 6
page 7
page 7
pages 8-10
page 11
back page
Advertisement
Related Manuals for Giant P316
Summarization of Contents
Pump Specifications
Horsepower Calculation Formulas
Formulas for calculating required motor horsepower based on pump specs.
Hydraulic Motor Torque Calculation
Formula to determine the torque of a hydraulic motor.
Pump RPM Calculation
Formula to calculate required pump RPM based on GPM.
Repair Kits
Plunger Packing and Seal Kits
Kits for plunger packing, Viton seals, and high-temp seals.
Valve and Oil Seal Kits
Kits for valve assembly and oil seals.
Pump Mounting Selection Guide
Bushings, Pulleys, and Rails
Guidelines for selecting mounting hardware like bushings, pulleys, and rails.
Preventative Maintenance
Maintenance Checklist
Checklist for daily, weekly, and periodic maintenance tasks.
Recommended Spare Parts
List of essential spare parts for maintenance intervals.
Repair Instructions - Disassembly
Valve Assembly and Seal Case Removal
Removing valve assemblies, O-rings, seal cases, and weep return rings.
Plug and Screw Removal
Removing discharge/inlet valve plugs and hex head cap screws.
Weep Hole Inspection
Checking and cleaning weep holes in valve casing and return ring.
Repair Instructions - Component Removal
Pressure Ring and Seal Removal
Removing pressure rings, grooved seals, and oil seals from the pump.
Plunger Surface Inspection
Checking plunger surfaces for wear and damage.
Repair Instructions - Reassembly
Oil Seal and Seal Case Installation
Installing oil seals, seal cases, and weep grooved seals correctly.
Final Assembly and Tightening
Assembling valve casing and tightening assembly screws to specified torque.
Need help?
Do you have a question about the P316 and is the answer not in the manual?
Questions and answers