Deployment
Acronis Snap Deploy uses Internet Group Management Protocol (IGMP) for
the multicasting. Therefore, all the network hardware (routers and/or
switches) must be IGMP-capable and correctly configured. The specific
information on configuring any particular router or switch is usually available
in the documentation, provided with the hardware.
If there is no IGMP-capable hardware (or you can not configure it correctly) in
the network, use the Unicast data transfer mode.
6.15 Providing comments
On the wizard page Template Comments, you will be able to provide the
template with a comment that can include any information on the deployment
procedure.
58
Figure 46. Deployment options: network utilization
Copyright © Acronis, Inc., 2000-2007