Using Acronis Universal Deploy - ACRONIS SNAP DEPLOY 2.0 User Manual

The following is for Acronis Snap Deploy installations including Acronis
Universal Deploy.
6.13.5

Using Acronis Universal Deploy

1. Using Acronis Universal Deploy will help you create a bootable system clone
on dissimilar hardware. Choose this when deploying a system to a computer
with a different processor, motherboard or mass storage device than in the
imaged system.
The Acronis Universal Deploy option does not work if master image contains dynamic
disks and volumes.
2. Click Next.
3. If the target hardware has a specific mass storage controller (such as a
SCSI, RAID, or Fibre Channel adapter) for the hard disk, you can install the
appropriate driver manually, bypassing the automatic driver search-and-install
procedure.
Use this option only if the automatic search-and-install procedure was
unsuccessful.
4. Click Next.
5. You can specify a path to the driver repository (a folder or folders on a
network drive or CD where the program will search for drivers).
Copyright © Acronis, Inc., 2000-2007
Figure 43. Select whether to use Acronis Universal Deploy
Deployment
55