ACRONIS SNAP DEPLOY 2.0 User Manual page 43

time. Then enter the target computer IP address and other settings necessary
for connection.
Figure 28. Acronis Snap Deploy Agent configuration: network settings
You can also specify the DNS name or IP address of the OS deployment
server; if you do not specify that information, the server will be found
automatically. If there are several deployment servers on the network, you
must specify the deployment server that is connected to the console or that
you are going to connect.
Figure 29. Acronis Snap Deploy Agent configuration: selecting deployment
If Acronis Snap Deploy Agent was configured to start automatically after several
seconds, the configuration prompt will turn off quickly.
Copyright © Acronis, Inc., 2000-2007
server
Deployment
43