ACRONIS SNAP DEPLOY 2.0 User Manual page 41

To update PXE Server:
1. Connect to a computer with Acronis PXE Server installed.
2. Click on Configure Acronis PXE Server in the Acronis Snap Deploy
Management Console main window.
3. Click Configure PXE Server in the Tasks sidebar to start the Update
PXE wizard and click Next.
4. Check/uncheck components you want to upload/remove and click Next.
The Start automatically after parameter indicates the time interval
between the remote computer boot and the selected program's automatic
start. For example, if you check the box for Acronis Snap Deploy Agent, the
agent will launch in 10 (or whatever you select) seconds after the target PC
boots. This eliminates the need for a click on the boot menu and enables fully
remote imaging or deployment. If you do not check the Start automatically
after box, the remote computer will display the boot menu and wait for your
selection.
5. In the next window you will see the server configuration summary,
containing a list of products that will be uploaded/removed. Click Proceed
to update Acronis PXE Server.
Copyright © Acronis, Inc., 2000-2007
Figure 25. Update PXE Server
Pre-deployment operations
41