Protecting Acronis Disk Director Suite Witha Password - ACRONIS DISK DIRECTOR SUITE 10 User Manual

Beginning The Work
After clicking Finish on the last wizard page:
The new partition structure is graphically represented in the Acronis Disk Director Suite
•
main window
The wizard creates a list of pending operations; you can see it by selecting Operations
•
 Show
Remember that no actions are performed on your disks when the wizard finishes working!
If you are sure that the new structure is suitable, select Operations  Commit or click
Commit Pending operations. Wizard-created pending operations will then be performed at
this time.
Before you select Operations  Commit or click Commit Pending operations, you can
undo your actions (calling a wizard) and wizard-created pending operations in the usual
way (selecting Operations  Undo or pressing
Acronis Disk Director Suite shows the wizard and its results as a user action by creating
the list of operations. Any pending actions can be fully undone by any of the mentioned
methods, i.e. pressing Undo Last Action will undo a user action and all operations planned
by the wizard.
2.5 Protecting Acronis Disk Director Suite With A Password
You should always be aware of possible unauthorized access to your data. To protect
your hard disk, partition, applications and data, Acronis Disk Director Suite provides
password protection.
If you need to protect Acronis Disk Director Suite with a password:
1. Select Disk

2. Enter a password in the New Password and Confirm New Password fields in the Set
Password window.
18
Set Password.
) or clicking
Ctrl+Z
Copyright © Acronis, Inc., 2000–2010
Undo Last Action.