Table of Contents
Advertisement
3.
Click OK to enable password protection.
After you run the program, you'll be prompted to enter a password in the Password
Protected window:
If you enter a wrong password, you'll be asked to re-enter it. Clicking Cancel will close the
program.
If you need to change the password:
Select Disk
1.
Set Password.
Enter the old password in the Old Password field and the new password in the New
2.
Password and Confirm New Password fields in the Set Password window.
Click OK to enable password protection.
3.
If you protect Acronis Disk Director Suite with a password and forget it, you will have to
uninstall Disk Director Suite (see 1.5 Removing Software), and install it again.
2.6
Viewing logs
Acronis Disk Director Suite allows users to view its working logs. They provide information
about partition operations, including reasons for failure, if any.
To invoke the log window, select Show log on the toolbar or from the Tools menu.
The log browsing window contains two panes: the left one features the log list, while the
right one shows selected log contents.
The left panel can contain up to 50 logs. If there are more, you can browse the list using
the More and Less buttons with the left and right arrows.
To delete a log, select it and click Delete.
Copyright © Acronis, Inc., 2000–2010
Beginning The Work
19
Advertisement
Table of Contents
