ACRONIS DISK DIRECTOR SUITE 10 User Manual page 17

2.4.6 Undoing user actions
Calling wizards or dialog boxes for planning disk partition operations are user actions.
User entries are necessary operation parameters on the wizard or dialog box pages.
One user action in Acronis Disk Director Suite enables you to plan a list of partition
operations, for example, calling a wizard for partition creation or resizing. (You can easily
verify your actions by looking at the Pending Operations when the wizard finishes its
work.)
You can also create a partition by selecting Disk  Create Partition. This requires a list of
actions to be performed (enter a label, select partition type, file system, size and
location), resulting in the creation of a single partition create operation only.
The difference between user actions and partition operations should be kept in mind if
you wish to undo user actions.
Any user action in Acronis Disk Director Suite can be undone or redone before committing
the operation. To undo a user action:
Select Operations  Undo from the main menu (or press Ctrl
•
Click the Undo Last Action toolbar button
•
To redo a user action:
Select Operations  Redo from the main menu (or press Ctrl
•
Click the Redo Last Action toolbar button
•
As user actions result in creating pending partition operations, as mentioned above,
undoing them results in canceling one or more partition operations. And conversely,
redoing a user action results in the addition of one or more pending operations.
Depending on the situation, undoing an action may cancel a pending operation or undo
changes of an existing operation (see 2.4.5 «Modifying pending operations»).
Similarly, redoing an action might add a pending operation to the list again or redo a
change of a pending operation parameter.
You can undo user actions one at a time or all at once by selecting Operations  Undo All.
Similarly, you can redo user actions (along with the corresponding graphical
representation of partition reconfiguration) one-by-one or all at once by selecting
Operations  Redo All.
2.4.7 Wizard operations
Pending partition operations created by Acronis Disk Director Suite wizards differ in that a
user must provide a list of operation parameters to perform them. Each parameter is entered
on a separate wizard page.
Entering operation parameters, you change wizard pages using Back and Next buttons
until you reach the Preview page with the Finish button.
On the Preview wizard page, you can click Back to return and change any operation
parameter.
Copyright © Acronis, Inc., 2000–2010
Beginning The Work
Z)
+
Y)
+
17