Backup Selection; Access Credentials For Source; Location Selection - ACRONIS Backup & Recovery 10 Advanced Server User Manual

2. In the table to the right of the tree, select the archive. The table displays the names of the
archives contained in each vault/folder you select. If the archive is password-protected, provide
the password.
While you are reviewing the location content, archives can be added, deleted or modified by
another user or by the program itself according to scheduled operations. Use the Refresh button
to refresh the list of archives.
3. Click OK.
6.7.3

Backup selection

To specify a backup(s) to export
1. At the top of the window, select the respective check box(es).
To ensure that you choose the right backup, click on the backup and look at the bottom table
that displays the volumes contained in the selected backup.
To obtain information on a volume, right-click it and then select Information.
2. Click OK.
6.7.4

Access credentials for source

Specify credentials required for access to the location where the source archive (or the backup) is
stored.
To specify credentials
1. Select one of the following:

Use the task credentials
The program will access the location using the credentials of the task account specified in the
General section.

Use the following credentials
The program will access the location using the credentials you specify. Use this option if the
task account does not have access permissions to the location. You might need to provide
special credentials for a network share or a storage node vault.
Specify:

User name. When entering the name of an Active Directory user account, be sure to also
specify the domain name (DOMAIN\Username or Username@domain)

Password. The password for the account.
2. Click OK.
According to the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
6.7.5

Location selection

Specify a destination where the exported object will be stored. Exporting backups to the same
archive is not allowed.
1. Selecting the export destination
Enter the full path to the destination in the Path field, or select the desired destination in the folders
tree.
Copyright © Acronis, Inc., 2000-2010 241