Post-Backup Command; Pre/Post Data Capture Commands - ACRONIS Backup & Recovery 10 Advanced Server User Manual

Post-backup command

To specify a command/executable file to be executed after the backup is completed
1. In the Command field, type a command or browse to a batch file.
2. In the Working directory field, specify a path to a directory where the command/batch file will
be executed.
3. In the Arguments field, specify the command execution arguments, if required.
4. If successful execution of the command is critical for your backup strategy, select the Fail the
task if the command execution fails check box. In case the command execution fails, the
program will remove the resulting TIB file and temporary files if possible, and the task will fail.
When the check box is not selected, the command execution result does not affect the task
execution failure or success. You can track the command execution result by exploring the log or
the errors and warnings displayed on the Dashboard.
5. Click Test Command to check if the command is correct.
3.4.1.4

Pre/Post data capture commands

This option is effective for both Windows and Linux operating systems.
The option enables you to define the commands to be automatically executed before and after data
capture (that is, taking the data snapshot) performed by Acronis Backup & Recovery 10 at the
beginning of the backup procedure.
The following scheme illustrates when the pre/post data capture commands are executed.
<------------------------------
Pre-backup Pre-data
command capture
command
If the Volume Shadow Copy Service (p. 103) option is enabled, the commands' execution and the
Microsoft VSS actions will be sequenced as follows:
"Before data capture" commands -> VSS Suspend -> Data capture -> VSS Resume -> "After data
capture" commands.
Using the pre/post data capture commands, you can suspend and resume a database or application
that is not compatible with VSS. As opposed to the Pre/Post commands (p. 99), the pre/post data
capture commands will be executed before and after the data capture process, which takes seconds,
while the entire backup procedure may take much longer, depending on the amount of data to be
backed up. Therefore, the database or application idle time will be minimal.
To specify pre/post data capture commands
1. Enable pre/post data capture commands execution by checking the following options:
 Execute before the data capture
 Execute after the data capture
2. Do any of the following:
100
command is executed despite
successfully execution failure
executed. Fail the or success.
task if the command
execution fails.
Backup
Data Post-data
capture capture
command
---------------------------->
Copyright © Acronis, Inc., 2000-2010
execution and
irrespective of the
command execution
result.
Post-backup
command