Backup Selection; Location Selection; Access Credentials For Source - ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - UPDATE 3 User Manual

While you are reviewing the location content, archives can be added, deleted or modified by
another user or by the program itself according to scheduled operations. Use the Refresh button
to refresh the list of archives.
3. Click OK.
6.4.3

Backup selection

To specify a backup to validate
1. In the upper pane, select a backup by its creation date/time.
The bottom part of the window displays the selected backup content, assisting you to find the
right backup.
2. Click OK.
6.4.4

Location selection

To select a location
Enter the full path to the location in the Path field or select the desired location in the folders tree.
 To select a centralized vault, expand the Centralized group and click the appropriate vault.
 To select a personal vault, expand the Personal group and click the appropriate vault.

To select a local folder (CD/DVD drive, or locally attached tape device), expand the Local folders
group and click the required folder.
 To select a network share, expand the Network folders group, select the required networked
machine and then click the shared folder. If the network share requires access credentials, the
program will ask for them.

To select FTP or SFTP server, expand the corresponding group and click the appropriate folder on
the server.
According to the original FTP specification, credentials required for access to FTP servers are
transferred through a network as plaintext. This means that the user name and password can be
intercepted by an eavesdropper using a packet sniffer.
Using the archives table
To assist you with choosing the right location, the table displays the names of the archives contained
in each location you select. While you are reviewing the location content, archives can be added,
deleted or modified by another user or by the program itself according to scheduled operations. Use
the Refresh button to refresh the list of archives.
6.4.5

Access credentials for source

Specify the credentials required for access to the location where the backup archive is stored.
To specify credentials
1. Select one of the following:

Use the task credentials
The program will access the location using the credentials of the task account specified in the
General section.
 Use the following credentials
140 Copyright © Acronis, Inc., 2000-2010