ACRONIS Backup & Recovery 10 Advanced Server User Manual page 121


Use encryption – you can opt for encrypted connection to the mail server. SSL and TLS
encryption types are available for selection.

Some Internet service providers require authentication on the incoming mail server before
being allowed to send something. If this is your case, select the Log on to incoming mail
server check box to enable a POP server and to set up its settings:

Incoming mail server (POP) – enter the name of the POP server.

Port – set the port of the POP server. By default, the port is set to 110.

User name – enter the user name

Password – enter the password.

Select the Use the specified outgoing mail server check box to enable an SMTP server and to
set up its settings:

Outgoing mail server (SMTP) – enter the name of the SMTP server.

Port – set the port of the SMTP server. By default, the port is set to 25.

User name – enter the user name.

Password – enter the password.
Click Send test e-mail message to check if the settings are correct.
Messenger service (WinPopup)
This option is effective for Windows and Linux operating systems.
This option is not available when operating under bootable media.
The option enables you to receive WinPopup notifications about about the recovery task's successful
completion, failure or need for interaction.
The preset is: Disabled.
Before configuring WinPopup notifications, make sure the Messenger service is started on both the
machine executing the task and the machine that will receive messages.
The Messenger service is not started by default in the Microsoft Windows Server 2003 family.
Change the service Startup mode to Automatic and start the service.
To configure WinPopup notifications:
1. Select the Send WinPopup notifications check box.
2. In the Machine name field, enter the name of the machine to which notifications will be sent.
Multiple names are not supported.
3. Under Send notifications, select the appropriate check boxes as follows:

When recovery completes successfully – to send notification when the recovery task has
completed successfully

When recovery fails – to send notification when the recovery task has failed.
The When user interaction is required check box – to send notification during the operation
when user interaction is required – is always selected.
4. Click Send Test WinPopup Message to check if the settings are correct.
3.4.2.5 Event tracing
It is possible to duplicate log events of the recovery operations, performed on the managed machine,
in the Application Event Log of Windows; or send the events to the specified SNMP managers.
Copyright © Acronis, Inc., 2000-2010 121