Snmp Notifications - ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - UPDATE 3 User Manual

2. In the Machine name field, enter the name of the machine to which notifications will be sent.
Multiple names are not supported.
Under Send notifications, select the appropriate check boxes as follows:
 When backup completes successfully – to send notification when the backup operation is
completed successfully
 When backup fails – to send notification when the backup operation is failed
The When user interaction is required check box – to send notification during the operation
when user interaction is required – is always selected.
Click Send test WinPopup message to check if the settings are correct.
3.3.1.9 Event tracing
It is possible to send log events of the backup operations, performed on the managed machine, to
the specified SNMP managers.

SNMP notifications

This option is effective for both Windows and Linux operating systems.
This option is not available when operating under the bootable media.
The option defines whether the agent(s) operating on the managed machine have to send the log
events of the backup operations to the specified Simple Network Management Protocol (SNMP)
managers. You can choose the types of events to be sent.
For detailed information about using SNMP with Acronis Backup & Recovery 10, please see "Support
for SNMP (p. 37)".
The preset is: Use the setting set in the Machine options.
To select whether to send the backup operations events to the SNMP managers:
Choose one of the following:

Use the setting set in the Machine options – to use the setting specified for the machine. For
more information refer to Machine options (p. 42).

Send SNMP notifications individually for backup operation events – to send the events of the
backup operations to the specified SNMP managers.

Types of events to send – choose the types of events to be sent: All events, Errors and
warnings, or Errors only.
 Server name/IP – type the name or IP address of the host running the SNMP management
application, the messages will be sent to.

Community – type the name of the SNMP community to which both the host running the
SNMP management application and the sending machine belong. The typical community is
"public".
Click Send test message to check if the settings are correct.

Do not send SNMP notifications – to disable sending the log events of the backup operations to
SNMP managers.
55 Copyright © Acronis, Inc., 2000-2010