Backup Selection; Access Credentials - ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - UPDATE 3 User Manual

ftp://ftp_server:port _number or sftp://sftp_server:port number
If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.
After entering access credentials, the folders on the server become available. Click the
appropriate folder on the server.
You can access the server as an anonymous user if the server enables such access. To do so,
click Use anonymous access instead of entering credentials.
According to the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.

If the archive is stored on a locally attached tape device, expand the Tape drives group, then
click the required device.
When operating on a machine booted with bootable media:

To access a managed vault, type the following string in the Path field:
bsp://node_address/vault_name/

To access an unmanaged centralized vault, type the full path to the vault's folder.
2. In the table to the right of the tree, select the archive. The table displays the names of the
archives contained in each vault/folder you select.
While you are reviewing the location content, archives can be added, deleted or modified by
another user or by the program itself according to scheduled operations. Use the Refresh button
to refresh the list of archives.
3. Click OK.
6.5.2

Backup selection

To select a backup:
1. Select one of the backups by its creation date/time.
2. To assist you with choosing the right backup, the bottom table displays the volumes contained in
the selected backup.
To obtain information on a volume, right-click it and then click Information.
3. Click OK.
6.5.3

Access credentials

To specify credentials
1. Select one of the following:
 Use the current user credentials
The program will access the location using the credentials of the current user.
 Use the following credentials
The program will access the location using the credentials you specify. Use this option if the
current user account does not have access permissions to the location. You might need to
provide special credentials for a network share or a storage node vault.
Specify:

User name. When entering the name of an Active Directory user account, be sure to also
specify the domain name (DOMAIN\Username or Username@domain)

Password. The password for the account.
143 Copyright © Acronis, Inc., 2000-2010