Initial Configuration Of Your Nas System; Configuring Your Storage System Using Keyboard, Monitor, And Mouse - Dell PowerVault NX3100 Administrator's Manual

Initial Configuration of Your NAS
System
Configuring Your Storage System Using Keyboard,
Monitor, and Mouse
1 Connect one end of an Ethernet cable into one of the 10/100/1000 RJ-45
Network Interface Cable (NIC) connectors at the back of your NAS system
and the other end to a working Ethernet port.
2 Connect one end of the power cable to the NAS system and the other end
to a power source.
3 Connect a keyboard, monitor, and mouse to the NAS system.
4 Press the power button to turn on the NAS system.
5 Log on to the NAS system as administrator. The default password is
Stor@ge!.
6 The Dell PowerVault NAS Initial Configuration Wizard guides you with:
An option for changing the default password.
a
Selecting and configuring the back-end storage software, if applicable.
b
Selecting and configuring the default system language, if needed.
c
Confirming the settings.
d
Rebooting the system, if necessary.
e
7 After reboot, log on to the system using the administrator account.
8 The Server Manager window opens each time an administrator logs on. If
Server Manager does not open, you can open it by clicking Start
Administrative Tools Server Manager.

Initial Configuration of Your NAS System

2
11