Creating The Nfs Share - Dell PowerVault NX3100 Administrator's Manual

After you create the key, you must restart Server for NFS.
To restart Server for NFS:
1 Click Start, right-click Command Prompt, and then click Run as
administrator to open an elevated command prompt.
2 Run the following command:
nfsadmin server stop && nfsadmin server start

Creating the NFS Share

Before creating the NFS share, see "NFS Share" on page 28.
After completing the prerequisites and configuration steps, follow the
instructions below to create the NFS share.
1 Click StartProgramsAdministrative tools Share and Storage
Management, or click Server Manager Roles File Services Share
and Storage Management.
2 On the right pane, select Provision Share.
3 Browse and select the volume that you want to enable as an NFS share and
follow the wizard.
4 Select NFS as the share protocol.
The folder name is displayed as share name followed by the share path.
Specify the NTFS/NFS settings and permissions in the next screens.
NOTE:
newly-created group details with specific permissions. (This adds all new
users that you included in that group).
5 Before the NFS share is created, Review settings and Create Share allows
you to revise the share settings before you actually create it.
6 Click Create to proceed.
7 Close the confirmation screen.
8 Go to NFS client and perform an NFS mount.
NOTE:
access to the NFS share. If you have enabled Anonymous access for the NFS
share, all UNIX users have access to the share.
40
Using Your NAS System
While creating the share, modify the NTFS settings to add the
Only the UNIX user (who was added in the domain user list) has