Installation And Configuration; Unpacking The System - Dell PowerVault 600 Getting Started

Installation and Configuration

CAUTION:
Before performing the following procedure, read and follow the
safety instructions and important regulatory information in your Product
Information Guide.
This section describes the steps to set up your system for the first time. The
illustrations that follow show a rack-mounted system, but the installation
procedure applies in large part to a stand-alone tower system. In place of the
rack installation in step 2, refer to the documentation included with your
system on installing the stabilizer feet on your system.
CAUTION:
Installing the feet on a stand-alone tower system is necessary to
provide a stable foundation for the system. Failure to install the feet poses the
risk of having the system tip over, possibly causing bodily injury or damage to
the system.
CAUTION:
Whenever you need to lift the system, get others to assist you. To avoid
injury, do not attempt to lift the system by yourself.

Unpacking the System

Unpack your system and identify each item.
Keep all shipping materials in case you need them later.
8
Getting Started With Your System