Dell PowerVault ML6000 User Manual page 109

sync.action = value
Specifies what should be done with the data during an auto synchronize.
Required
Values
Default
Note: merging configuration information is the same as rewriting it.
sync.ipaddress = ip_addr:ssl
Specifies the IP address and port of the remote Encryption Key Manager to
auto synchronize.
Required
Values
sync.timeinhours = value
Specifies how many hours to wait before doing an auto synchronize with a
remote Encryption Key Manager.
Required
Values
Default
sync.type = value
Specifies what data to auto synchronize.
Required
Values
Default
TransportListener.ssl.ciphersuites = JSSE_ALL
Cipher suites to be used for communication between Encryption Key
Manager servers. A cipher suite describes the cryptographic algorithms and
handshake protocols Transport Layer Security (TLS) and Secure Sockets
Layer (SSL) use for data transfer.
Required
Values
TransportListener.ssl.clientauthentication = 0
SSL authentication needed for communication between Encryption Key
Manager servers.
Required
Values
TransportListener.ssl.keystore.name = value
The name of the database used by the Encryption Key Manager Server to
hold the certificate and private keys for the Secure Socket Server. This
certificate is given to the Secure Socket client for authentication and trust
checking. This keystore is also used by the Encryption Key Manager Client
to talk to the Encryption Key Manager Server and act as a Secure Sockets
client.
Appendix B. Encryption Key Manager Configuration Properties Files
Optional.
rewrite | merge
merge
Optional. If this property is unspecified or specified
incorrectly, the sync function is disabled.
IP address of remote server:SSL port number
Optional.
Specified in hours.
24
Optional.
config | drivetab | all
drivetab
Optional.
Values – any cipher suites supported by IBMJSSE2.
Optional.
0 - no client authentication (default)
1 - server wants to do client authentication with the client
2 - the server must do client authentication with the client
B-7