Dell PowerVault ML6000 User Manual page 104

Admin.ssl.keystore.password = password
Admin.ssl.keystore.type = value
Admin.ssl.protocols = value
Admin.ssl.timeout = value
Admin.ssl.truststore.name = value
Admin.ssl.truststore.type = value
Audit.event.outcome = value
Audit.event.Queue.max = 0
B-2
Dell Encryption Key Mgr User's Guide
Password to access Admin.ssl.keystore.name
Required Optional. If not supplied, may be prompted for on start of
Encryption Key Manager. When specified, the value for
this property is obfuscated for additional security and the
stanza name itself in the properties file will be replaced
with a new stanza that is named
'Admin.ssl.keystore.password.obfuscated.'
Type of keystore used.
Required Optional.
Default jceks
Security protocols.
Required Optional.
Values SSL_TLS | SSL | TLS
Default SSL_TLS
Specifies how long a socket waits for a read() before throwing a
SocketTimeoutException.
Required Optional.
Values Specified in minutes. 0 means no timeout
Default 1
This is the name of the database file that is used to check the trust of the
Secure Sockets Server certificate that the server presents to the Secure
Sockets client.
Required Optional. Used only with sync command. Defaults to value
of config.keystore.file property.
Type of keystore used.
Optional.
Required
jceks
Default
Only audit events that resulted in the specified outcome are recorded
Required Yes.
Values success | failure. Both can be specified separated by
comma or semicolon.
Default success
The maximum number of event objects in the audit memory queue before
they will be flushed to file.
Required Optional. Recommended.
Values 0 - ? (0 means flush immediately.)