Advertisement
For the following models:
8104
8105
8106
SAFETYCHECKLIST
KEEP unqualified/unauthorized personnel away from test area
ARRANGE test stations in a safe and orderly manner
NEVER touch products or connections during a test
TURN OFF high voltage first in the event of a problem
NEVER perform a test on energized circuitry or equipment
BE SURE to always connect the return test lead first
HANDLE test clips by insulation only, never touch clips directly
WARNING: THIS GUIDE WAS CREATED
FOR OPERATORS HAVING SOME
FAMILIARITY WITH HIPOT AND ELECTRICAL SAFETY
TESTING. A HIPOT TESTER PRODUCES VOLTAGES
AND CURRENTS THAT CAN CAUSE HARMFUL OR
FATAL ELECTRIC SHOCK. TO PREVENT ACCIDENTAL
INJURY OR DEATH, THESE SAFETY PROCEDURES
MUST BE STRICTLY OBSERVED WHEN HANDLING
AND USING A TEST INSTRUMENT.
Advertisement
Table of Contents
Related Manuals for Associated Research Omnia 8106
Summarization of Contents
Safety Precautions
Safety Checklist and Warnings
Lists essential safety precautions and warnings for operating the instrument.
Front Panel Controls
Front Panel Control Descriptions
Details the function of each button, LED, display, and terminal on the instrument's front panel.
Back Panel Controls (8104)
8104 Back Panel Interface
Describes the connectors and features on the back panel specific to the 8104 model.
Back Panel Controls (8105/8106)
8105/8106 Back Panel Interface
Details the connectors and features on the back panel specific to the 8105 and 8106 models.
Instrument Setup
Initial Power-Up and Setup
Step-by-step guide for connecting power, ensuring proper grounding, and turning on the instrument.
Test Configuration
Adding and Modifying Tests
Procedure for adding new test types and adjusting test parameters like voltage and limits.
Saving and Loading Test Files
Instructions on how to save test programs to files and recall them for later use.
Performing a Test
Test Connections (8104)
Guide for connecting the 8104 instrument to the Device Under Test (DUT) via adapter box.
Test Connections (8105/8106)
Guide for connecting the 8105/8106 instruments to the Device Under Test (DUT) via adapter box.
Test Connections (Class II DUT)
Instructions for connecting to a Class II DUT, including high voltage and sense lead connections.
Initiating a Test Sequence
Steps to start a test using the front panel TEST button and how to abort a test.
Test Results
Viewing and Navigating Results
How to access, review, and navigate through the recorded test results on the instrument display.
Need help?
Do you have a question about the Omnia 8106 and is the answer not in the manual?
Questions and answers