Installation Requirements - Dell PowerVault MD3000i User Manual

Installation Requirements

The following requirements must be met in order to install and use the Dell
MD Storage Array vCenter Plug-in.
• VMware vCenter 4.x server (installed)
• Dell storage array with VMware certified firmware
• An application server running an MD Storage Array vCenter Plug-in
supported operating system as defined in the Support Matrix at
support.dell.com/manuals.
In addition, system names and IP addresses of vCenter and the Dell MD
Storage arrays are required during installation. Use the following table as a
template to document the system names and IP addresses of the equipment
to be used during the installation process.
Table 1. Configuration Worksheet Example
vCenter Server
Name
vCenter
Administrator
Name
Application Server
Name
Dell Storage Array 1
Name
Dell Storage Array 2
Name
Dell Storage Array 3
Name
Storage
Administrator User
ID
Storage
Administrator User
ID
6
Dell MD Storage Array vCenter Plug-in
VCENTER-4
administrator
App-Server
WinterPark-173-
174
User 1
DNS Name
IP Address
Password
DNS Name
IP Address
IP Addresses
IP Addresses
IP Addresses
vcenter-4.dell.com
192.168.51. 217
password
app-server.dell.com
192.168.51. 225
192.168.51.173/174
N/A