Dell PowerVault MD3000i User Manual page 36

Figure 25. Virtual Disk Mapping View
From the wizard, select the host group or host to which the new virtual disk
will be mapped. Select the LUN number to use and virtual disk to be mapped.
Click OK to complete the mapping.
After the virtual disks have been mapped to the ESX host, the storage
adapters on the ESX host must be rescanned to detect the new storage virtual
disks. This action is accomplished from Hosts and Clusters
viewConfiguration tabStorage Adapters for the ESX host being
configured. See Figure 26.
NOTE:
It may be necessary to run the rescan twice to detect all of the new storage
virtual disks that have been mapped to the ESX host.
36
Dell MD Storage Array vCenter Plug-in