•
Replace physical disks
•
Modify the RAID level for a disk group
Tools Tab
•
Rename a storage array
•
Set or change a password
•
View or enable premium features
•
Turn on indicator lights
•
Change enclosure ID numbers
•
Set or change enclosure tags
•
Set up e-mail alerts and SNMP alerts
•
Synchronize controller clocks, change the network configuration, or
change battery settings
•
Inherit system settings
•
Change media scan settings
•
Change the pre-read redundancy check settings
iSCSI Tab
•
Set the authentication method supported by the target
•
Define permissions for mutual authentication
•
Set an alias for the target for identification
•
Modify the discovery method for iSCSI targets
•
Set the parameters for iSCSI host ports
•
View or end iSCSI sessions
•
View iSCSI statistics
NOTE:
The iSCSI tab is shown only in the MD Storage Manager when the
controllers contain iSCSI host ports.
Support Tab
•
Recover from a failure
•
Gather support information
About This Guide
13