Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hyster E30Z
Summarization of Contents
General
Description
Overview of lift truck cylinders, their functions, and types within the mast assembly.
Tilt Cylinder Repair
Remove Tilt Cylinder
Steps for safely removing the tilt cylinder from the mast and frame assembly.
Disassemble Tilt Cylinder
Instructions for taking apart the tilt cylinder, including gland and piston removal.
Inspect Tilt Cylinder Components
Procedures for checking tilt cylinder components like the gland, piston, and rod for damage.
Clean Tilt Cylinder Parts
Guidelines for cleaning tilt cylinder parts using solvents and compressed air, with safety notes.
Assemble Tilt Cylinder
Steps for reassembling the tilt cylinder, including seal installation and torque specifications.
Adjust Tilt Cylinders
Procedures for adjusting tilt cylinder stroke and synchronizing mast tilt movement.
Tilt Cylinder Leak Check
Method to test tilt cylinders for hydraulic leaks using a load and timed measurement.
Tilt Cylinder Torque Specifications
Specific torque values for tilt cylinder assembly components like the piston rod nut and gland.
Lift Cylinder Repair
Remove Lift Cylinder
Steps to safely remove main lift cylinders from the mast, including securing the mast.
Disassemble Lift Cylinder
Instructions for disassembling main lift cylinders, emphasizing protection of internal parts.
Clean Lift Cylinder Parts
Cleaning procedures for main lift cylinder components, including safety warnings for solvents.
Inspect Lift Cylinder Components
How to inspect main lift cylinder parts like the gland, piston, and rod for damage.
Assemble Lift Cylinder
Guidance on assembling main lift cylinders, including lubricating parts and installing new seals.
Need help?
Do you have a question about the E30Z and is the answer not in the manual?
Questions and answers