7. Slide and hold the keyboard release latch
8. Remove the TM2.5×8.0 screw
panel assembly to the base enclosure.
9. Lift the edge of the insulator
enclosure.
10. On the right side of the hard drive bay, pull the plastic tab
connected to the digitizer cable
the cable.
Removing the Display Panel Assembly Screw and Disconnecting
the Digitizer Cable
Maintenance and Service Guide
Removal and Replacement Procedures
1
2
that secures the display
3
nearest the edge of the base
4
to the right to disconnect
to the right.
5–19