Dell PowerVault 530F Hardware Installation Manual page 7

support.dell.com
back-right rail
0.125-inch
rail spacing

            !  

        
See your Rack Installation Guide for instructions on installing the system chassis in a
rack.
    
If your VersaRails kit came with a cable tray, see your Rack Installation Guide for
instructions on attaching the cable tray to your system.
     
To install the cable-management arm in the rack, perform the following steps:
1. Facing the back of the rack cabinet, align the right-angle bracket of the cable-
management arm over the rail mounting screws on the cabinet's back vertical rail
as shown in Figure 1-4.
second
mounting hole
bottom of VersaRail
Installing VersaRails 1-5