Dell PowerVault 530F Hardware Installation Manual page 4

1-2 Installing VersaRails
NOTES: Your Dell system is safety-certified as a free-standing unit and as a compo-
nent for use in a Dell rack cabinet using the Dell customer rack kit. The installation of
your system and rack kit in any non-Dell rack cabinet has not been approved by any
safety agencies. It is your responsibility to have the final combination of system and
rack kit in a non-Dell rack cabinet evaluated for suitability by a certified safety agency.
Dell disclaims all liability and warranties in connection with such combinations.
For instructions on installing the system itself, see your Rack Installation Guide.

  
 
See your Rack Installation Guide for important safety information.
       
To install the VersaRail kit components, you need the following tools:


#2 Phillips screwdriver


Measuring tape


Level

 
Installing the VersaRail kit and the system into a rack cabinet involves the following
tasks:


Installing the VersaRails in the rack


Installing the system chassis in the rack (see your Rack Installation Guide for
instructions)


Installing the cable tray, if applicable


Installing the cable-management arm
  
   
To install the rails in the rack, perform the following steps.
#$ %         &     '
(  )     &     )     *  
   " &    (  )    
+    "