Table of Contents
Advertisement
TWO-WAY 6-BUTTON LCD REMOTE STARTER
FOR AUTOMATIC OR MANUAL TRANSMISSION
34-0794 | CT-4311TW
User Guide
It is the responsibility of the vehicle operator to ensure their vehicle is parked
in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user's responsibility
to ensure that the gearshift lever is in the NEUTRAL position and the parking
brake is engaged in order to avoid accidents upon remote starting.
b) Automatic transmission: When leaving the vehicle, it is the user's
responsibility to ensure that the gearshift lever is in "Park" in order to avoid
accidents upon remote starting.
(Note: Make sure that the automatic vehicle cannot start in "Drive".)
2. It is the user's responsibility to ensure that the remote starter is disabled or put
into valet mode before servicing.
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment
D1124
2015-08-07
WARNING
- VM -
Canada
Advertisement
Chapters
Table of Contents
Related Manuals for ProStart 34-0794
Summarization of Contents
Government Regulations
Introduction with SmartStart™
Introduces the SmartStart system and its advanced features for enhanced vehicle comfort and security.
Vehicle Presets
Heater
Recommended settings for the blower motor (fan) for optimal cabin comfort during remote start.
Using the Transmitter
Explains how to use the 6-button multi-channel remote control for various vehicle functions.
LCD Transmitter Operations
Basic Vehicle Operations
Details fundamental vehicle operations controllable via the remote, such as locking/unlocking doors and trunk release.
Backlight
Describes how to activate and use the LCD screen's backlight for better visibility.
Remote Advanced Functions and MENU
Accessing Advanced Remote Functions and MENU
Step-by-step instructions on accessing the advanced functions and programming menu on the remote control.
Menu Functions Details
PARK (Parking Meter Countdown)
Function for parking meter countdown, allowing quick setup and alerts for time expiration.
ALARM (Alarm Clock)
Details the built-in alarm clock function, its setting, and activation confirmation.
Cold Weather Mode
Explains how to activate and use the Cold Weather Mode for engine starting in low temperatures.
Valet Function
Describes the Valet mode, which disables remote start and alarm functions for service or parking.
Transmitter Configuration Options
Backlight Color
Allows selection from 8 different backlight colors for the LCD screen.
Keypad Lock
Feature to lock the transmitter's keypad to prevent accidental button presses.
Arming and Disarming the Starter Kill
Passive Mode
Starter Kill arms automatically after a set time or when doors are closed, without user intervention.
Active Mode
Requires user intervention via the transmitter to arm or disarm the Starter Kill feature.
Remote-Starting your Vehicle
Setting your Vehicle into Ready Mode
Procedure to prepare the vehicle for remote start, essential for manual transmission vehicles.
Remote Starting Operations
Remote Starting Options
Details three possible options for completing Ready Mode: No lock, Manual shut down, and Automatic shut down.
Driving Off
Instructions for safely taking over control of the vehicle after a remote start.
Starter Kill System Management
Passive Mode
Starter Kill arms automatically after a set time or when doors are closed, without user intervention.
Active Mode
Requires user intervention via the transmitter to arm or disarm the Starter Kill feature.
Remote Starter Features
Remote Door Locks
Enables keyless entry by locking and unlocking vehicle doors remotely.
Idle Mode
Feature to keep the engine running with doors locked, allowing quick stops without shutting down.
Valet Modes
To put the system into Valet Mode
Instructions for enabling Valet Mode using either the ignition key or the transmitter.
Panic Mode
Activates the vehicle's horn to deter intruders or in emergency situations.
Cold Weather Mode
To enter Cold Weather Mode:
Steps to activate Cold Weather Mode, which automatically starts the engine periodically.
Extended Run Time Features
Features related to extending engine run time and quick lockout.
Quick Lockout™™
Provides instant door locking for security during emergency situations, activated by horn.
Advanced Features: Installation-Programmable Options
Ignition-Controlled Door Locks
Automatically locks vehicle doors when the ignition is turned ON and unlocks them when OFF.
Secure Lock
Enhances security by relocking doors after a remote start and disarming the factory alarm.
Safe Start
Prevents accidental remote starts, requiring specific button presses for activation.
Engine Run Time and Turbo Mode
Engine Run Time
Configurable engine run times for gasoline and diesel engines, with default settings provided.
Turbo Mode
Feature to keep the turbocharger idling down after vehicle shutdown for longevity.
Home Valet™™ Mode
To put the system into Home Valet™™ mode:
Steps to activate Home Valet Mode, which disables remote start functions for security.
AUX 1 Functions
Priority Door:
Feature to unlock only the driver's door with a single press of the transmitter button.
Multi-Car Operation
Allows controlling two vehicles with the same remote starter model.
OEM-Style Alarm and Intrusion Codes
OEM-Style Alarm
Monitors doors, hood, and ignition, sounding the alarm and horn upon intrusion.
Start or Stop Confirmation Issues
Troubleshooting steps for missing start or stop confirmations from the remote.
Multi-Level Features Configuration
MENU
Provides access to a comprehensive list of available menu options for customization.
To control the Multi level features, refer to the tables below:
Guide to accessing and configuring various vehicle features via multi-level settings.
Need help?
Do you have a question about the 34-0794 and is the answer not in the manual?
Questions and answers