Dell PowerVault 110T DLT1 Manual page 3

select the Devices tab and then determine the
"Hardware name" of the resource of the Storage Array
to be migrated.
In the example found in Figure 1, "VIRTDISK 8" in "ARRAY 1"
is going to be migrated, and its associated hardware name is
"VDS_CREATED_001".
Figure 1: Example selection of a storage resource to be migrated
b. From the DL Backup to Disk Appliance Console,
launch Dell's OpenManage Server Administrator
(OMSA). Select Virtual Disks from the appropriate
PERC 6/e Adapter as seen in Figure 2 and locate the
hardware name of the resource to be migrated as
determined in step 1.a.
Media Migration
3