Dell PowerVault 110T DLT1 Manual page 12

Copying Data Sets
Specific media sets can be copied from one PowerVault DL
Appliance to another. Copying sets involves the duplicate
operation to copy media sets from one appliance to another.
Perform the following steps to copy media sets from one
appliance to another:
1. On the source appliance, create a backup-to-disk folder
where the data will reside on the target appliance.
a. Select Tools › Wizards › Backup-to-Disk.
Next to continue the wizard.
b. Click
Create a new backup to disk folder.
c. Select
d. Select Backup-to-disk folder.
e. Name the backup-to-disk folder.
f. Select a path to store the backup-to-disk folder. This
path should be located on the appliance where the
media sets are being copied.
g. Set the size for the backup-to-disk files.
h. Set the maximum file size.
i. Set the number of backup sets per file.
j. Set the maximum number of concurrent jobs.
k. Set the low disk space thresholds.
l. Complete the wizard.
Job Setup tab, select New Job to Duplicate
2. On the
Backup Sets.
3. Select Duplicate Existing Backup Sets.
4. Select the backup sets that are to be copied to the new
appliance.
5. Select the backup-to-disk folder on the new appliance
(specified in step 1) as the destination for the duplicate
operation from the Device and Media tab.
6. Complete other settings for the wizard and select
Now to run the duplicate operation.
7. Once the duplicate operation has completed, go to the
new appliance.
8. On the new appliance, create a backup-to-disk folder
following step 1. Specify the path for the backup-to-disk
Media Migration
Run
12